perm filename TRIP.LOG[TUG,DEK]3 blob
sn#684630 filedate 1982-11-02 generic text, type T, neo UTF8
This is TeX, Version 0.6 (format=trip 82.11.2) 2 NOV 1982 05:18
** &trip trip
(TRIP.TEX
{vertical mode: \openout}
{\write}
{\write}
{\write}
{\vsize}
{\vbadness}
{\topskip}
{\penalty}
{\maxdepth}
{\tracingoutput}
{\moveleft}
{\moveright}
{restricted horizontal mode: \vrule}
{end-group character }}
{vertical mode: blank space}
{\penalty}
Completed box being shipped out [0.0.0.0.11]
\vbox(2000.0+2.0)x21.0, glue set 1952.0fil
.\openout10=tripos
.\write10{}
.\write10{\uppercase {\number \outputpenalty }}
.\write10{\uppercase {\number \the \outputpenalty }}
.\glue(\topskip) 9.59999 plus 1.0fil
.\vbox(10.40001+0.0)x0.0, shifted -20.0
..\rule(0.40001+0.0)x*
..\glue 10.0 plus 5.0filll
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+20.0)x1.0, shifted 20.0
..\rule(-19.0+20.0)x1.0
! Missing number.
<to be read again>
\outputpenalty
<write> ...umber \outputpenalty
}
<to be read again>
} \endwrite
l.106 \penalty-10000
% now the default output routine will act
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the TeX manual index.)
Memory usage before: 139&240; after: 87&226; max so far: 151&319
{\output}
{\setbox}
{internal vertical mode: end-group character }}
{vertical mode: blank space}
{\setdimen}
{begin-group character {}
{\output}
{\insert}
{internal vertical mode: \def}
{\baselineskip}
{\lineskip}
{\vbox}
{end-group character }}
{\penalty}
{\vbox}
{end-group character }}
{\penalty}
{\vbox}
{end-group character }}
{\penalty}
{end-group character }}
{vertical mode: \topskip}
{\vbox}
{internal vertical mode: end-group character }}
! Infinite glue shrinkage inserted from \skip 100.
l.130 \vbox expand 1000pt{}
% beginning of new page
The correction glue for page breaking with insertions
must have finite shrinkability. But you may proceed,
since the offensive shrinkability has been made finite.
{vertical mode: blank space}
{\penalty}
{\cleaders}
{restricted horizontal mode: \lower}
{internal vertical mode: end-group character }}
{restricted horizontal mode: blank space}
{\leaders}
{\cleaders}
{the letter A}
{end-group character }}
{\leaders}
{the letter A}
{end-group character }}
{\xleaders}
{the letter A}
{end-group character }}
{\write}
{end-group character }}
{vertical mode: \mark}
{the letter A}
{horizontal mode: the letter A}
{\insert}
{internal vertical mode: \baselineskip}
{\hbox}
{restricted horizontal mode: end-group character }}
{internal vertical mode: \hbox}
{restricted horizontal mode: end-group character }}
{internal vertical mode: end-group character }}
{horizontal mode: \advcount}
{\mark}
{\par}
@firstpass
@secondpass
[]\rip A[][]
@\par via @@0 b=* p=-10000 d=0
@@1: line 1.0- t=0 -> @@0
Overfull \hbox (2.0pt too wide) in paragraph at lines 140--140
[]\rip A|
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
{vertical mode: the letter A}
{horizontal mode: the letter A}
{\insert}
{internal vertical mode: \baselineskip}
{\hbox}
{restricted horizontal mode: end-group character }}
{internal vertical mode: \hbox}
{restricted horizontal mode: end-group character }}
{internal vertical mode: end-group character }}
{horizontal mode: \advcount}
{\mark}
{\par}
@firstpass
@secondpass
[]\rip A[][]
@\par via @@0 b=* p=-10000 d=0
@@1: line 1.0- t=0 -> @@0
Overfull \hbox (2.0pt too wide) in paragraph at lines 140--140
[]\rip A|
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
{vertical mode: the letter A}
{horizontal mode: the letter A}
{\insert}
{internal vertical mode: \baselineskip}
{\hbox}
{restricted horizontal mode: end-group character }}
{internal vertical mode: \hbox}
{restricted horizontal mode: end-group character }}
{internal vertical mode: end-group character }}
{horizontal mode: \advcount}
{\mark}
{\par}
@firstpass
@secondpass
[]\rip A[][]
@\par via @@0 b=* p=-10000 d=0
@@1: line 1.0- t=0 -> @@0
Overfull \hbox (2.0pt too wide) in paragraph at lines 140--140
[]\rip A|
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
{vertical mode: \everypar}
{\kern}
{the letter A}
{horizontal mode: the letter A}
{\hfill}
{\vadjust}
{internal vertical mode: \special}
{\penalty}
{end-group character }}
{horizontal mode: \penalty}
{the letter A}
{\par}
@firstpass
@secondpass
[]\rip A
@ via @@0 b=* p=0 d=0
@@1: line 1.0 t=0 -> @@0
[]
@\penalty via @@1 b=* p=-10000 d=0
@@2: line 2.1 t=0 -> @@1
A
@\par via @@2 b=* p=-10000 d=0
@@3: line 3.0- t=0 -> @@2
Overfull \hbox (2.0pt too wide) in paragraph at lines 145--148
[]\rip A|
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
Overfull \hbox (2.0pt too wide) in paragraph at lines 145--148
\rip A|
\hbox(7.0+1.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
{vertical mode: \insert}
{internal vertical mode: \vskip}
{end-group character }}
{vertical mode: \penalty}
{\showlists}
### vertical mode entered at line 0
### current page:
\insert100, natural size 803.09999
.\vbox(267.7+0.0)x0.0
.\penalty -101
.\glue(\lineskip) 0.0 minus 0.39999
.\vbox(267.7+0.0)x0.0
.\penalty -100
.\glue(\lineskip) 0.0 minus 0.39999
.\vbox(267.7+0.0)x0.0
.\penalty -1000
\glue(\topskip) 0.0 plus 44.0
\vbox(1000.0+0.0)x0.0
\penalty 12345
\cleaders 50.0 minus 10.0
.\hbox(15.0+2.0)x41.0
..\vbox(17.0+0.0)x0.0, shifted 2.0
..\glue 4.0 plus 2.0 minus 1.0
..\leaders 10.0
...\rule(0.40001+0.0)x*
..\cleaders 9.0
...\hbox(7.0+1.0)x2.0
....\rip A
..\leaders 9.0
...\hbox(7.0+1.0)x2.0
....\rip A
..\xleaders 9.0
...\hbox(7.0+1.0)x2.0
....\rip A
..\write11{\help }
\mark{alpha}
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 3.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\insert200, natural size 400.0
.\hbox(0.0+0.0)x0.0
.\glue(\baselineskip) 400.0
.\hbox(0.0+0.0)x-10.0
\mark{1}
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 2.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\insert200, natural size 400.0
.\hbox(0.0+0.0)x0.0
.\glue(\baselineskip) 400.0
.\hbox(0.0+0.0)x-10.0
\mark{2}
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 2.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\insert200, natural size 400.0
.\hbox(0.0+0.0)x0.0
.\glue(\baselineskip) 400.0
.\hbox(0.0+0.0)x-10.0
\mark{3}
\kern-50.0
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 2.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\glue(\baselineskip) 9.0 plus 41.0
\hbox(0.0+0.0)x0.0
.\penalty -1000000000
.\glue(\rightskip) 0.0
\special{-1000.0pt}
\penalty -5000
\glue(\baselineskip) 3.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\insert200, natural size 10000.0
.\glue 10000.0
\penalty 99999999
total height 1060.0 plus 458.0 plus 8.0filll minus 33.0
goal height 1055.44061
\insert100 adds 535.36987, #1 might split
\insert200 adds 405.19714, #3 might split
prevdepth 1.0, prevgraf 3 lines
! OK.
l.149 ...nalty99999999\showlists
{\vskip}
{\penalty}
! \box255 is not absent.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
You shouldn't use \box255 except in \output routines.
Proceed, and I'll discard its present contents.
The following box has been deleted:
\vbox(0.0+0.0)x0.0
{internal vertical mode: \setdimen}
{\setcount}
{\global}
{\setbox}
{\shipout}
{restricted horizontal mode: \box}
{\box}
{\vsplit}
Overfull \vbox (987.0pt too high) has occurred while \output is active
\vbox(55.0+-2.0)x0.0, glue set - 1.0
.\glue(\topskip) 0.0 plus 44.0
.\vbox(1000.0+0.0)x0.0
.\penalty 12345
.\cleaders 50.0 minus 10.0
..\hbox(15.0+2.0)x41.0
...\vbox(17.0+0.0)x0.0, shifted 2.0
...\glue 4.0 plus 2.0 minus 1.0
...\leaders 10.0
....\rule(0.40001+0.0)x*
...\cleaders 9.0
....\hbox(7.0+1.0)x2.0
.....\rip A
...\leaders 9.0
....\hbox(7.0+1.0)x2.0
.....\rip A
...\xleaders 9.0
....\hbox(7.0+1.0)x2.0
.....\rip A
...\write11{\help }
.\mark{alpha}
{end-group character }}
Completed box being shipped out [-5000.0.0.0.11.53110375]
\hbox(810.40001+0.0)x0.0
.\vbox(267.7+0.0)x0.0
..\vbox(267.7+0.0)x0.0
.\vbox(810.40001+0.0)x0.0
..\rule(0.40001+0.0)x*
..\glue 10.0 plus 5.0filll
..\hbox(0.0+0.0)x0.0
..\glue(\baselineskip) 400.0
..\hbox(0.0+0.0)x-10.0
..\hbox(0.0+0.0)x0.0
..\glue(\baselineskip) 400.0
..\hbox(0.0+0.0)x-10.0
..\hbox(0.0+0.0)x0.0
.\vbox(55.0+-2.0)x0.0, glue set - 1.0
..\glue(\topskip) 0.0 plus 44.0
..\vbox(1000.0+0.0)x0.0
..\penalty 12345
..\cleaders 50.0 minus 10.0
...\hbox(15.0+2.0)x41.0
....\vbox(17.0+0.0)x0.0, shifted 2.0
....\glue 4.0 plus 2.0 minus 1.0
....\leaders 10.0
.....\rule(0.40001+0.0)x*
....\cleaders 9.0
.....\hbox(7.0+1.0)x2.0
......\rip A
....\leaders 9.0
.....\hbox(7.0+1.0)x2.0
......\rip A
....\xleaders 9.0
.....\hbox(7.0+1.0)x2.0
......\rip A
....\write11{\help }
..\mark{alpha}
Memory usage before: 715&401; after: 561&398; max so far: 760&404
{internal vertical mode: blank space}
{\unbox}
{\showlists}
### internal vertical mode entered at line 150 (\output routine)
\glue(\splittopskip) 0.0 plus 43.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\mark{1}
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 2.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\mark{2}
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 2.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\mark{3}
\kern-50.0
\glue(\parskip) 0.0 plus 42.0 minus 8.0
\glue(\baselineskip) 2.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\hbox(0.0+0.0)x0.0
.\rip A
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\glue(\baselineskip) 9.0 plus 41.0
\hbox(0.0+0.0)x0.0
.\penalty -1000000000
.\glue(\rightskip) 0.0
\special{-1000.0pt}
prevdepth ignored
### vertical mode entered at line 0
### current page: (held over for next output)
\insert100, natural size 535.39999
.\glue(\splittopskip) 0.0 plus 43.0
.\vbox(267.7+0.0)x0.0
.\penalty -100
.\glue(\lineskip) 0.0 minus 0.39999
.\vbox(267.7+0.0)x0.0
.\penalty -1000
\insert200, natural size 1.0
.\glue(\splittopskip) 1.0 plus 43.0
.\hbox(0.0+0.0)x-10.0
### recent contributions:
\penalty 10000
\glue(\baselineskip) 3.0 plus 41.0
\hbox(7.0+1.0)x0.0
.\rip A
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
.\rule(*+*)x5.0
\insert200, natural size 10000.0
.\glue 10000.0
\penalty 99999999
\glue 1000.0
\penalty -333
prevdepth 1.0, prevgraf 3 lines
! OK.
<output> ...unbox 255\showlists
\message {\topmark :\firstmar...
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
{\message}
:alpha:3:alpha:alpha
{\global}
{\global}
{end-group character }}
! \output routine didn't use all of \box255.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
Your \output commands should empty \box255,
e.g., by saying `\shipout\box255'.
Proceed; I'll discard its present contents.
The following box has been deleted:
\vbox(1055.44061+0.0)x0.0, glue set 0.01305
.\glue(\topskip) 0.0 plus 44.0
.\vbox(1000.0+0.0)x0.0
.etc.
! Infinite glue shrinkage inserted from \skip 100.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
The correction glue for page breaking with insertions
must have finite shrinkability. But you may proceed,
since the offensive shrinkability has been made finite.
{\setdimen}
{\setcount}
{\global}
{\setbox}
{\shipout}
{restricted horizontal mode: \box}
{\box}
{\vsplit}
{end-group character }}
Completed box being shipped out [10000.0.0.0.11.65536]
\hbox(535.39999+0.0)x0.0
.\vbox(535.39999+0.0)x0.0 []
.\vbox(1.0+0.0)x0.0 []
.etc.
Memory usage before: 465&387; after: 280&383; max so far: 760&418
{internal vertical mode: blank space}
{\unbox}
{\showlists}
### internal vertical mode entered at line 150 (\output routine)
prevdepth ignored
### vertical mode entered at line 0
### recent contributions:
\glue(\baselineskip) 9.0 plus 41.0
\hbox(0.0+0.0)x0.0
.\penalty -1000000000
.\glue(\rightskip) 0.0
etc.
prevdepth 1.0, prevgraf 3 lines
! OK.
<output> ...unbox 255\showlists
\message {\topmark :\firstmar...
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
{\message}
3:1:3:1:3
{\global}
{\global}
{end-group character }}
! \output routine didn't use all of \box255.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
Your \output commands should empty \box255,
e.g., by saying `\shipout\box255'.
Proceed; I'll discard its present contents.
The following box has been deleted:
\vbox(924.73383+1.0)x0.0, glue set 3.20045
.\glue(\topskip) 0.0 plus 44.0
.\hbox(7.0+1.0)x0.0 []
.etc.
{\setdimen}
{\setcount}
{\global}
{\setbox}
{\shipout}
{restricted horizontal mode: \box}
{\box}
{\vsplit}
Overfull \vbox (959.0pt too high) has occurred while \output is active
\vbox(55.0+-2.0)x0.0
.\glue(\topskip) 1.0 plus 44.0
.\hbox(0.0+0.0)x0.0 []
.etc.
{end-group character }}
Completed box being shipped out [-333.0.0.0.11.655360000]
\hbox(10000.0+0.0)x0.0
.\vbox(10000.0+0.0)x0.0 []
.\vbox(55.0+-2.0)x0.0 []
Memory usage before: 208&376; after: 141&375; max so far: 760&418
{internal vertical mode: blank space}
{\unbox}
{\showlists}
### internal vertical mode entered at line 150 (\output routine)
prevdepth ignored
### vertical mode entered at line 0
### recent contributions:
\penalty 10000
prevdepth 1.0, prevgraf 3 lines
! OK.
<output> ...unbox 255\showlists
\message {\topmark :\firstmar...
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
{\message}
3:3:3::
{\global}
{\global}
{end-group character }}
! \output routine didn't use all of \box255.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
Your \output commands should empty \box255,
e.g., by saying `\shipout\box255'.
Proceed; I'll discard its present contents.
The following box has been deleted:
\vbox(-3010.0+0.0)x0.0
.\glue(\topskip) 1.0 plus 44.0
.\hbox(0.0+0.0)x0.0 []
.etc.
{vertical mode: \hbox}
{restricted horizontal mode: end-group character }}
{vertical mode: blank space}
{\global}
! Dimension too large.
l.151 \global\vsize=100000pt
% everything else will fit on ...
I can't work with sizes bigger than about 19 feet.
Continue and I'll use the largest value I can.
{end-group character }}
{blank space}
{begin-group character {}
{\tracingoutput}
{\tracingstats}
{\shipout}
{restricted horizontal mode: \closeout}
{end-group character }}
[-333.0.0.0.11]
{vertical mode: end-group character }}
{blank space}
{\showthe}
> A\insert 200{\baselineskip 400pt \hbox {}\hbox to -10pt{}} \advcount 1
5by1\mark {\the \count 15} \paR \gobble .
l.154 \showthe\everypar
{\everypar}
{\showthe}
> .
l.155 ...ypar{}\showthe\everypar
\showthe\minusthe\everypar
{\showthe}
! Improper use of \the.
l.155 ...owthe\minusthe\everypar
I'm forgetting what you said and using zero for this \the.
> 0.
l.155 ...owthe\minusthe\everypar
{\def}
{\tracingmacros}
{\def}
{\varunit}
{\ifdim}
\t 12#101001#{->-.#1pt{
#1<-01001010
{\relax}
{end-group character }}
{\setcount}
{\ifeven}
{\advcount}
{end-group character }}
{\penalty}
{internal vertical mode: \tracingcommands}
> -12345.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.164 \penalty -12345
% output the remaining stuff
Completed box being shipped out [-2.0.0.0.11]
\vbox(2000.0+0.0)x23.0, glue set 45.43182
.\glue(\topskip) 1.0 plus 44.0
.\hbox(0.0+0.0)x23.0
Memory usage before: 114&270; after: 98&270; max so far: 760&418
{vertical mode: \adjdemerits}
{\linepenalty}
{\def}
{\ }
{horizontal mode: \ }
{\valign}
{restricted horizontal mode: \spacefactor}
{\global}
{end-group character }}
{blank space}
{end-group character }}
{internal vertical mode: \baselineskip}
{\global}
{\global}
{\rightskip}
{\global}
{\setbox}
\1#1->\hbox to#1pt{}
#1<-2
{restricted horizontal mode: end-group character }}
{internal vertical mode: blank space}
{\noindent}
{horizontal mode: \copy}
{\hskip}
{\copy}
{\hskip}
{\lower}
\1#1->\hbox to#1pt{}
#1<-1
{restricted horizontal mode: end-group character }}
{horizontal mode: \hskip}
{\copy}
{\hskip}
{\box}
{end of alignment template}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
[]
@ via @@0 b=51 p=0 d=2704
@ via @@1 b=10000 p=0 d=100020001
@@2: line 1.2 t=2704 -> @@0
[]
@ via @@0 b=30 p=0 d=961
@ via @@1 b=10000 p=0 d=100020001
@ via @@2 b=10000 p=0 d=100020001
@@3: line 1.0 t=961 -> @@0
[]
@ via @@2 b=10000 p=0 d=100020001
@ via @@3 b=10000 p=0 d=100020783
@@4: line 2.3 t=100021744 -> @@3
[]
@\par via @@2 b=0 p=-10000 d=1
@\par via @@3 b=30 p=-10000 d=1743
@\par via @@4 b=10000 p=-10000 d=100020001
@@5: line 2.1- t=2705 -> @@2
@@6: line 2.2- t=2704 -> @@3
Tight \hbox (badness 30) in paragraph at lines 183--183
[] [] []
\hbox(0.0+2.0)x13.0, glue set - 0.66667
.\glue(\leftskip) 4.0
.\hbox(0.0+0.0)x2.0
.etc.
Loose \hbox (badness 30) in paragraph at lines 183--183
[] []
\hbox(0.0+0.0)x13.0, glue set 0.66667
.\glue(\leftskip) 4.0
.\hbox(0.0+0.0)x2.0
.etc.
{internal vertical mode: \baselineskip}
{\global}
{\global}
{\rightskip}
{\global}
{\setbox}
\1#1->\hbox to#1pt{}
#1<-2
{restricted horizontal mode: end-group character }}
{internal vertical mode: blank space}
{\noindent}
{horizontal mode: \copy}
{\hskip}
{\copy}
{\hskip}
{\lower}
\1#1->\hbox to#1pt{}
#1<-1
{restricted horizontal mode: end-group character }}
{horizontal mode: \hskip}
{\copy}
{\hskip}
{\box}
{\adjdemerits}
{end of alignment template}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020785
@@1: line 1.3 t=100020785 -> @@0
[]
@ via @@0 b=51 p=0 d=2704
@ via @@1 b=10000 p=0 d=100020001
@@2: line 1.2 t=2704 -> @@0
[]
@ via @@0 b=30 p=0 d=961
@ via @@1 b=10000 p=0 d=100020001
@ via @@2 b=10000 p=0 d=100020001
@@3: line 1.0 t=961 -> @@0
[]
@ via @@2 b=10000 p=0 d=100020001
@ via @@3 b=10000 p=0 d=100020785
@@4: line 2.3 t=100021746 -> @@3
[]
@\par via @@2 b=0 p=-10000 d=1
@\par via @@3 b=30 p=-10000 d=1745
@\par via @@4 b=10000 p=-10000 d=100020001
@@5: line 2.1- t=2705 -> @@2
@@6: line 2.2- t=2706 -> @@3
Loose \hbox (badness 51) in paragraph at lines 184--184
[] []
\hbox(0.0+0.0)x13.0, glue set 0.8
.\glue(\leftskip) 4.0
.\hbox(0.0+0.0)x2.0
.etc.
{internal vertical mode: \baselineskip}
{\global}
{\global}
{\rightskip}
{\global}
{\setbox}
\1#1->\hbox to#1pt{}
#1<-2
{restricted horizontal mode: end-group character }}
{internal vertical mode: blank space}
{\noindent}
{horizontal mode: \copy}
{\hskip}
{\copy}
{\hskip}
{\lower}
\1#1->\hbox to#1pt{}
#1<-1
{restricted horizontal mode: end-group character }}
{horizontal mode: \hskip}
{\copy}
{\hskip}
{\box}
{\linepenalty}
{\hbadness}
{end of alignment template}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100040786
@@1: line 1.3 t=100040786 -> @@0
[]
@ via @@0 b=51 p=0 d=2809
@ via @@1 b=10000 p=0 d=100040004
@@2: line 1.2 t=2809 -> @@0
[]
@ via @@0 b=30 p=0 d=1024
@ via @@1 b=10000 p=0 d=100040004
@ via @@2 b=10000 p=0 d=100040004
@@3: line 1.0 t=1024 -> @@0
[]
@ via @@2 b=10000 p=0 d=100040004
@ via @@3 b=10000 p=0 d=100040786
@@4: line 2.3 t=100041810 -> @@3
[]
@\par via @@2 b=0 p=-10000 d=4
@\par via @@3 b=30 p=-10000 d=1806
@\par via @@4 b=10000 p=-10000 d=100040004
@@5: line 2.1- t=2813 -> @@2
@@6: line 2.2- t=2830 -> @@3
{restricted horizontal mode: blank space}
{end-group character }}
{horizontal mode: blank space}
{begin-group character {}
{\hsize}
{\par}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
[][][]
@ via @@0 b=10000 p=0 d=100020783
@ via @@1 b=10000 p=0 d=100020001
@@2: line 1.3 t=100020783 -> @@0
@\par via @@0 b=10000 p=-10000 d=100020783
@\par via @@1 b=10000 p=-10000 d=100020001
@\par via @@2 b=10000 p=-10000 d=100020001
@@3: line 1.3- t=100020783 -> @@0
Underfull \hbox (badness 10000) in paragraph at lines 171--187
[] [][][]
\hbox(22.0+0.0)x1000.0, glue set 237.5
.\glue(\leftskip) 4.0
.\hbox(0.0+0.0)x0.0
.etc.
{vertical mode: \parindent}
{\indent}
{horizontal mode: end-group character }}
{\leftskip}
{\noindent}
{\indent}
{\hbox}
{restricted horizontal mode: end-group character }}
{horizontal mode: \discretionary}
{restricted horizontal mode: the letter A}
{end-group character }}
{the letter B}
{end-group character }}
{the character /}
{\kern}
{end-group character }}
{horizontal mode: \vbox}
{internal vertical mode: \hrule}
{end-group character }}
{horizontal mode: blank space}
{\par}
@firstpass
[][][]\rip AAABB-
@\discretionary via @@0 b=0 p=88 d=7921
@@1: line 1.1- t=7921 -> @@0
[]
@\par via @@1 b=0 p=-10000 d=100001
@@2: line 2.1- t=107922 -> @@1
{vertical mode: \penalty}
{internal vertical mode: \tracingcommands}
> -22222.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.191 \penalty-22222
% end of demerits test, hyphenation is next
Completed box being shipped out [-2.0.0.0.11]
\vbox(16383.99998+0.0)x1000.0, glue set 16342.0fil
.\glue(\topskip) 0.0 plus 1.0fil
.\hbox(22.0+0.0)x1000.0, glue set 237.5
..\glue(\leftskip) 4.0
..\hbox(0.0+0.0)x0.0
..\glue 4.0 plus 2.0 minus 1.0
..\glue(\xspaceskip) -1.0
..\vbox(22.0+0.0)x13.0
...\glue(\tabskip) 0.0
...\vbox(22.0+0.0)x13.0, glue set 2.0
....\hbox(0.0+2.0)x13.0, glue set - 0.66667
.....\glue(\leftskip) 4.0
.....\hbox(0.0+0.0)x2.0
.....\glue 2.0 plus 5.0 minus 1.0
.....\hbox(0.0+0.0)x2.0
.....\glue 5.0 minus 2.0
.....\hbox(0.0+0.0)x1.0, shifted 2.0
.....\glue(\rightskip) -1.0
....\penalty 125
....\glue(\baselineskip) 18.0 plus 1.0
....\hbox(0.0+0.0)x13.0, glue set 0.66667
.....\glue(\leftskip) 4.0
.....\hbox(0.0+0.0)x2.0
.....\glue 2.0 plus 6.0
.....\hbox(0.0+0.0)x2.0
.....\penalty 10000
.....\glue(\parfillskip) 0.0
.....\glue(\rightskip) -1.0
...\glue(\tabskip) 0.0
..\vbox(22.0+0.0)x13.0
...\glue(\tabskip) 0.0
...\vbox(22.0+0.0)x13.0
....\hbox(0.0+0.0)x13.0, glue set 0.8
.....\glue(\leftskip) 4.0
.....\hbox(0.0+0.0)x2.0
.....\glue 2.0 plus 5.0 minus 1.0
.....\hbox(0.0+0.0)x2.0
.....\glue(\rightskip) -1.0
....\penalty 125
....\glue(\baselineskip) 20.0 plus 1.0
....\hbox(0.0+2.0)x13.0
.....\glue(\leftskip) 4.0
.....\hbox(0.0+0.0)x1.0, shifted 2.0
.....\glue 3.0
.....\hbox(0.0+0.0)x2.0
.....\glue 2.0 plus 6.0
.....\hbox(0.0+0.0)x2.0
.....\penalty 10000
.....\glue(\parfillskip) 0.0
.....\glue(\rightskip) -1.0
...\glue(\tabskip) 0.0
..\vbox(22.0+0.0)x13.0
...\glue(\tabskip) 0.0
...\vbox(22.0+0.0)x13.0
....\hbox(0.0+0.0)x13.0, glue set 0.8
.....\glue(\leftskip) 4.0
.....\hbox(0.0+0.0)x2.0
.....\glue 2.0 plus 5.0 minus 1.0
.....\hbox(0.0+0.0)x2.0
.....\glue(\rightskip) -1.0
....\penalty 125
....\glue(\baselineskip) 20.0 plus 1.0
....\hbox(0.0+2.0)x13.0
.....\glue(\leftskip) 4.0
.....\hbox(0.0+0.0)x1.0, shifted 2.0
.....\glue 3.0
.....\hbox(0.0+0.0)x2.0
.....\glue 2.0 plus 6.0
.....\hbox(0.0+0.0)x2.0
.....\penalty 10000
.....\glue(\parfillskip) 0.0
.....\glue(\rightskip) -1.0
...\glue(\tabskip) 0.0
..\glue 4.0 plus 2.0 minus 1.0
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 2.0 plus 41.0
.\hbox(8.0+2.0)x13.0
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x1.0
..\hbox(0.0+0.0)x0.0
..\hbox(0.0+0.0)x2.0
..\discretionary
..\rip A (ligature AAA)
..\kern2.0
..\rip B
..\glue(\rightskip) 0.0
.\penalty 162
.\glue(\baselineskip) 7.59999 plus 41.0
.\hbox(0.40001+0.0)x13.0
..\glue(\leftskip) 3.0
..\rip C (ligature B-)
..\vbox(0.40001+0.0)x6.0
...\rule(0.40001+0.0)x6.0
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
Memory usage before: 926&293; after: 548&287; max so far: 938&418
{vertical mode: \looseness}
{\uchyph}
{\hsize}
{the letter A}
{horizontal mode: the letter A}
{blank space}
{the character /}
{\vadjust}
{internal vertical mode: \uchyph}
{\ }
{horizontal mode: \ }
{the letter B}
{end-group character }}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
\rip BBBBBB
@\par via @@0 b=10000 p=-10000 d=100020783
@@2: line 1.3- t=100020783 -> @@0
@\par via @@1 b=10000 p=-10000 d=100020001
@@3: line 2.3- t=200040784 -> @@1
Underfull \hbox (badness 10000) in paragraph at lines 200--200
[] \rip BBBBBB
\hbox(7.0+1.0)x100.0, glue set 41.5
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{\vadjust}
{internal vertical mode: \ }
{horizontal mode: \ }
{the letter B}
{end-group character }}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
\rip BB-
@\discretionary via @@0 b=10000 p=88 d=101788703
@@2: line 1.3- t=101788703 -> @@0
@\discretionary via @@1 b=10000 p=88 d=101787921
@@3: line 2.3- t=201808704 -> @@1
B-BBB
@\discretionary via @@0 b=10000 p=88 d=101788703
@@4: line 1.3- t=101788703 -> @@0
@\discretionary via @@2 b=10000 p=88 d=101788921
@\discretionary via @@1 b=10000 p=88 d=101787921
@@5: line 2.3- t=201808704 -> @@1
@\discretionary via @@3 b=10000 p=88 d=101788921
@@6: line 3.3- t=303597625 -> @@3
@\par via @@0 b=10000 p=-10000 d=100020783
@@7: line 1.3- t=100020783 -> @@0
@\par via @@4 b=10000 p=-10000 d=100120001
@\par via @@2 b=10000 p=-10000 d=100120001
@\par via @@1 b=10000 p=-10000 d=100020001
@@8: line 2.3- t=200040784 -> @@1
@\par via @@5 b=10000 p=-10000 d=100120001
@\par via @@3 b=10000 p=-10000 d=100120001
@@9: line 3.3- t=301928705 -> @@3
@\par via @@6 b=10000 p=-10000 d=100120001
@@10: line 4.3- t=403717626 -> @@6
Underfull \hbox (badness 10000) in paragraph at lines 201--201
[] \rip BB-B-BBB
\hbox(7.0+1.0)x100.0, glue set 41.5
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{\hyphenation}
{\vadjust}
{internal vertical mode: \ }
{horizontal mode: \ }
{the letter B}
{end-group character }}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
\rip BBB-BBB
@\discretionary via @@0 b=10000 p=88 d=101788703
@@2: line 1.3- t=101788703 -> @@0
@\discretionary via @@1 b=10000 p=88 d=101787921
@@3: line 2.3- t=201808704 -> @@1
@\par via @@0 b=10000 p=-10000 d=100020783
@@4: line 1.3- t=100020783 -> @@0
@\par via @@2 b=10000 p=-10000 d=100120001
@\par via @@1 b=10000 p=-10000 d=100020001
@@5: line 2.3- t=200040784 -> @@1
@\par via @@3 b=10000 p=-10000 d=100120001
@@6: line 3.3- t=301928705 -> @@3
Underfull \hbox (badness 10000) in paragraph at lines 202--202
[] \rip BBB-BBB
\hbox(7.0+1.0)x100.0, glue set 41.5
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{\vadjust}
{internal vertical mode: \def}
{\ }
{horizontal mode: \ }
{\looseness}
{\pretolerance}
{the letter B}
\B ->B
{end-group character }}
@firstpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
\rip BBBBBB
@\par via @@0 b=10000 p=-10000 d=100020783
@\par via @@1 b=10000 p=-10000 d=100020001
@@2: line 1.3- t=100020783 -> @@0
Underfull \hbox (badness 10000) in paragraph at lines 203--203
[] \rip BBBBBB
\hbox(7.0+1.0)x100.0, glue set 41.5
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{\par}
@firstpass
@secondpass
[]\rip A
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
/AA-
@\discretionary via @@0 b=10000 p=88 d=101788703
@@2: line 1.3- t=101788703 -> @@0
@\discretionary via @@1 b=10000 p=88 d=101787921
@@3: line 2.3- t=201808704 -> @@1
B-BBB
@\discretionary via @@0 b=10000 p=88 d=101788703
@@4: line 1.3- t=101788703 -> @@0
@\discretionary via @@2 b=10000 p=88 d=101788921
@\discretionary via @@1 b=10000 p=88 d=101787921
@@5: line 2.3- t=201808704 -> @@1
@\discretionary via @@3 b=10000 p=88 d=101788921
@@6: line 3.3- t=303597625 -> @@3
C-A
@\discretionary via @@0 b=10000 p=88 d=101788703
@@7: line 1.3- t=101788703 -> @@0
@\discretionary via @@4 b=10000 p=88 d=101788921
@\discretionary via @@2 b=10000 p=88 d=101788921
@\discretionary via @@1 b=10000 p=88 d=101787921
@@8: line 2.3- t=201808704 -> @@1
@\discretionary via @@5 b=10000 p=88 d=101788921
@\discretionary via @@3 b=10000 p=88 d=101788921
@@9: line 3.3- t=303597625 -> @@3
@\discretionary via @@6 b=10000 p=88 d=101788921
@@10: line 4.3- t=405386546 -> @@6
CAC//[][][][]
@\par via @@0 b=10000 p=-10000 d=100020783
@@11: line 1.3- t=100020783 -> @@0
@\par via @@7 b=10000 p=-10000 d=100120001
@\par via @@4 b=10000 p=-10000 d=100120001
@\par via @@2 b=10000 p=-10000 d=100120001
@\par via @@1 b=10000 p=-10000 d=100020001
@@12: line 2.3- t=200040784 -> @@1
@\par via @@8 b=10000 p=-10000 d=100120001
@\par via @@5 b=10000 p=-10000 d=100120001
@\par via @@3 b=10000 p=-10000 d=100120001
@@13: line 3.3- t=301928705 -> @@3
@\par via @@9 b=10000 p=-10000 d=100120001
@\par via @@6 b=10000 p=-10000 d=100120001
@@14: line 4.3- t=403717626 -> @@6
@\par via @@10 b=10000 p=-10000 d=100120001
@@15: line 5.3- t=505506547 -> @@10
Underfull \hbox (badness 10000) in paragraph at lines 195--204
[]\rip A /AA-B-BBBC-ACAC//
\hbox(8.0+2.0)x100.0, glue set 33.53377
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{vertical mode: \hbox}
{restricted horizontal mode: \sfcode}
{the letter A}
{blank space}
{the letter a}
{blank space}
{end-group character }}
{vertical mode: blank space}
{\scriptscriptfont}
{superscript character ↑}
! Missing $ inserted.
<to be read again>
↑
l.206 ...scriptfont3 \smalltrip↑
{}$\scriptfont3=\rip \texinfo...
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
{math mode character $}
{horizontal mode: math mode character $}
{math mode: superscript character ↑}
{end-group character }}
{math mode character $}
! Math formula deleted: Insufficient extension fonts.
l.206 ...iptfont3 \smalltrip↑{}$
\scriptfont3=\rip \texinfo\sm...
Sorry, but I can't typeset math unless \textfont 3
and \scriptfont 3 and \scriptscriptfont 3 have all
the texinfo needed in math extension fonts.
{horizontal mode: \scriptfont}
{\texinfo}
{begin-group character {}
{\rightskip}
{\looseness}
{\spaceskip}
{the letter A}
{\spacefactor}
{\discretionary}
{restricted horizontal mode: end-group character }}
{the character -}
{end-group character }}
{the letter B}
{\kern}
{end-group character }}
{horizontal mode: blank space}
{the letter C}
{math mode character $}
{math mode: blank space}
{\scriptfont}
{\mathsurround}
{math mode character $}
! Math formula deleted: Insufficient symbol fonts.
l.210 \mathsurround143pt$
C $\mathsurround40pt$$\mathsurrou...
Sorry, but I can't typeset math unless \textfont 2
and \scriptfont 2 and \scriptscriptfont 2 have all
the texinfo needed in math symbol fonts.
{horizontal mode: blank space}
{the letter C}
{blank space}
{math mode character $}
{math mode: \mathsurround}
{math mode character $}
{horizontal mode: math mode character $}
{math mode: \mathsurround}
{\hbox}
{restricted horizontal mode: math mode character $}
{math mode: math mode character $}
{restricted horizontal mode: end-group character }}
{math mode: math mode character $}
{horizontal mode: \par}
! Infinite glue shrinkage found in a paragraph.
l.210 ...round60pt\hbox{$$}$\par
}
The paragraph just ended includes some glue that has
infinite shrinkability, e.g., `\hskip 0pt minus 1fil'.
Such glue doesn't belong there---it allows a paragraph
of any length to fit on one line. But it's safe to proceed,
since the offensive shrinkability has been made finite.
@firstpass
@secondpass
[]$$\rip A-
@\discretionary via @@0 b=76 p=89 d=27556
@@1: line 1.2- t=27556 -> @@0
@\kern via @@0 b=69 p=0 d=4900
@@2: line 1.2 t=4900 -> @@0
@\kern via @@1 b=102 p=0 d=10609
@@3: line 2.3 t=38165 -> @@1
C$$
@\math via @@0 b=17 p=0 d=324
@@4: line 1.0 t=324 -> @@0
@\math via @@2 b=12 p=0 d=169
@\math via @@1 b=8 p=0 d=81
@@5: line 2.1 t=5069 -> @@2
@\math via @@3 b=12 p=0 d=951
@@6: line 3.1 t=39116 -> @@3
C
@ via @@4 b=71 p=0 d=5966
@@7: line 2.2 t=6290 -> @@4
@ via @@5 b=71 p=0 d=5184
@@8: line 3.2 t=10253 -> @@5
@ via @@6 b=71 p=0 d=5184
@@9: line 4.2 t=44300 -> @@6
$$$[]$
@\par via @@7 b=57 p=-10000 d=4146
@@10: line 3.0- t=10436 -> @@7
@\par via @@8 b=57 p=-10000 d=4146
@@11: line 4.0- t=14399 -> @@8
@\par via @@9 b=57 p=-10000 d=4146
@@12: line 5.0- t=48446 -> @@9
Loose \hbox (badness 76) in paragraph at lines 206--210
[]$$\rip A
\hbox(7.0+1.0)x100.0, glue set 0.91347
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
Loose \hbox (badness 94) in paragraph at lines 206--210
\rip -
\hbox(0.0+0.0)x100.0, glue set 0.98077
.\glue(\leftskip) 3.0
.\rip -
.etc.
Tight \hbox (badness 12) in paragraph at lines 206--210
\rip C$$
\hbox(0.0+0.0)x100.0, glue set - 0.5
.\glue(\leftskip) 3.0
.\rip C
.etc.
Loose \hbox (badness 71) in paragraph at lines 206--210
\rip C
\hbox(0.0+0.0)x100.0, glue set 0.89423
.\glue(\leftskip) 3.0
.\rip C
.etc.
Tight \hbox (badness 57) in paragraph at lines 206--210
[]$
\hbox(0.0+0.0)x100.0, glue set - 0.83
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x120.0 []
.etc.
{vertical mode: end-group character }}
{blank space}
{\uccode}
{\input}
(TRIPOS.TEX
{\par}
{\uppercase}
{the character 0}
{horizontal mode: the character 0}
Missing character: There is no 0 in font trip!
{\outputpenalty}
! Missing number.
<to be read again>
\uppercase
l.3 \uppercase
{mmmmmmmmmm}
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the TeX manual index.)
{\uppercase}
{the letter A}
{\par}
@firstpass
@secondpass
[]\rip AAAAAAAAAA
@\par via @@0 b=* p=-10000 d=783
@@1: line 1.3- t=783 -> @@0
Underfull \hbox (badness 10000) in paragraph at lines 2--4
[]\rip AAAAAAAAAA
\hbox(7.0+1.0)x100.0
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
)
{vertical mode: \penalty}
{internal vertical mode: \tracingcommands}
> -33333.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.212 \penalty-33333
% end hyphenation, math is next
Completed box being shipped out [-2.0.0.0.11]
\vbox(16383.99998+1.0)x100.0, glue set 16262.0fil
.\glue(\topskip) 12.0 plus 1.0fil
.\hbox(8.0+2.0)x100.0, glue set 33.53377
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\rip A
..\glue 4.0 plus 1.99799 minus 1.00099
..\rip /
..\kern1.0
..\discretionary replacing 2
...\rip A (ligature AA)
...\kern3.0
...\rip -
..\rip A (ligature AA)
..\kern2.0
..\discretionary replacing 3
...\rip C (ligature B-)
..|\rip A (ligature BB)
..|\kern2.0
..|\rip B
..|\kern4.0
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\discretionary replacing 1
...\rip C
...\rip -
..|\rip A
..\rip ['202] (ligature CA)
..\rip ['202] (ligature CA)
..\rip B (ligature C/)
..\rip /
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\hbox(7.0+1.0)x100.0, glue set 41.5
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\glue 4.0 plus 2.0 minus 1.0
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\hbox(7.0+1.0)x100.0, glue set 41.5
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\glue 4.0 plus 2.0 minus 1.0
..\discretionary replacing 2
...\rip A (ligature BB)
...\kern3.0
...\rip -
..\rip A (ligature BB)
..\kern2.0
..\discretionary replacing 3
...\rip C (ligature B-)
..|\rip A (ligature BB)
..|\kern2.0
..|\rip B
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\hbox(7.0+1.0)x100.0, glue set 41.5
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\glue 4.0 plus 2.0 minus 1.0
..\rip A (ligature BB)
..\kern2.0
..\discretionary replacing 3
...\rip C (ligature B-)
..|\rip A (ligature BB)
..|\kern2.0
..|\rip B
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\hbox(7.0+1.0)x100.0, glue set 41.5
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\glue 4.0 plus 2.0 minus 1.0
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\kern2.0
..\rip A (ligature BB)
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\glue(\baselineskip) 0.0 plus 41.0
.\hbox(8.0+2.0)x20.0
..\rip A
..\kern2.0
..\rip B
..\glue 4.0 plus 2.0 minus 1.0
..\rip a
..\rip B
..\glue 4.0 plus 2.46799 minus 0.81036
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 1.0 plus 41.0
.\hbox(7.0+1.0)x100.0, glue set 0.91347
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\mathon
..\mathoff
..\rip A
..\discretionary
..\glue(\rightskip) 0.0 plus 104.0 minus 100.0
.\penalty 37
.\glue(\baselineskip) 9.0 plus 41.0
.\hbox(0.0+0.0)x100.0, glue set 0.98077
..\glue(\leftskip) 3.0
..\rip -
..\kern0.0
..\glue(\rightskip) 0.0 plus 104.0 minus 100.0
.\penalty -125
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x100.0, glue set - 0.5
..\glue(\leftskip) 3.0
..\rip C
..\mathon, surrounded 143.0
..\mathoff
..\glue(\rightskip) 0.0 plus 104.0 minus 100.0
.\penalty -125
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x100.0, glue set 0.89423
..\glue(\leftskip) 3.0
..\rip C
..\glue(\rightskip) 0.0 plus 104.0 minus 100.0
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x100.0, glue set - 0.83
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x120.0
...\mathon, surrounded 60.0
...\mathoff, surrounded 60.0
..\mathoff, surrounded 60.0
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0 plus 104.0 minus 100.0
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 3.0 plus 41.0
.\hbox(7.0+1.0)x100.0
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\rip A (ligature AAAAAAAAAA)
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
Memory usage before: 888&444; after: 509&363; max so far: 938&448
{vertical mode: \font}
! Undefined control sequence.
l.213 ...\badtrip xyzzy \badtrip
\relax\badtrip % nonexistent ...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Font \badtrip=xyzzy not loadable: Metric (TFM) file not found.
<to be read again>
\relax
l.213 ...ip xyzzy \badtrip\relax
\badtrip % nonexistent font
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same number>=<new name>'.
{\relax}
{select font nullfont}
{\font}
{\font}
! Improper `at' size (-10.0pt), replaced by 10pt.
l.215 \font\ip trip at -10pt
% through the looking glass
I can only handle fonts at positive sizes that are
less than 2048pt, so I've changed what you said to 10pt.
{\showthe}
> nullfont.
l.216 \showthe\badtrip
{\showthe}
> \badtrip .
l.217 \showthe\font
{\showthe}
> trip.
l.218 \showthe\ip
{select font trip}
{\textfont}
{\scriptfont}
{\scriptscriptfont}
{\def}
{begin-group character {}
{\tracingmacros}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{\global}
{end-group character }}
{blank space}
{\mathcode}
{\mathcode}
{\delcode}
{\chcode}
{\chcode}
{\def}
{\parshape}
\a ->1pt 11.0pt2pt 12.0pt3pt 13.0pt4pt 14.0pt5pt 15.0pt6pt 16.0pt7pt 17.
0pt8pt 18.0pt9pt 19.0pt10pt 20.0pt
{\hangindent}
{\groupbegin}
{\looseness}
{\rightskip}
{\-}
{horizontal mode: \-}
{the character -}
{\-}
{the character -}
{\-}
{math mode character $}
@firstpass
[]\ip -
@\discretionary via @@0 b=0 p=88 d=7921
@@1: line 1.1- t=7921 -> @@0
-
@\discretionary via @@0 b=0 p=89 d=8100
@@2: line 1.1- t=8100 -> @@0
@\discretionary via @@1 b=0 p=89 d=9100
@@3: line 2.1- t=17021 -> @@1
-
@\discretionary via @@0 b=0 p=88 d=7921
@@4: line 1.1- t=7921 -> @@0
@\discretionary via @@2 b=0 p=88 d=8921
@\discretionary via @@1 b=0 p=88 d=8921
@@5: line 2.1- t=16842 -> @@1
@\discretionary via @@3 b=0 p=88 d=8921
@@6: line 3.1- t=25942 -> @@3
-↑↑@-
@\discretionary via @@0 b=0 p=89 d=8100
@@7: line 1.1- t=8100 -> @@0
@\discretionary via @@4 b=0 p=89 d=9100
@\discretionary via @@2 b=0 p=89 d=9100
@\discretionary via @@1 b=0 p=89 d=9100
@@8: line 2.1- t=17021 -> @@1
@\discretionary via @@5 b=0 p=89 d=9100
@\discretionary via @@3 b=0 p=89 d=9100
@@9: line 3.1- t=25942 -> @@5
@\discretionary via @@6 b=0 p=89 d=9100
@@10: line 4.1- t=35042 -> @@6
A-
@\discretionary via @@0 b=0 p=88 d=7921
@@11: line 1.1- t=7921 -> @@0
@\discretionary via @@7 b=0 p=88 d=8921
@\discretionary via @@4 b=0 p=88 d=8921
@\discretionary via @@2 b=0 p=88 d=8921
@\discretionary via @@1 b=0 p=88 d=8921
@@12: line 2.1- t=16842 -> @@1
@\discretionary via @@8 b=0 p=88 d=8921
@\discretionary via @@5 b=0 p=88 d=8921
@\discretionary via @@3 b=0 p=88 d=8921
@@13: line 3.1- t=25763 -> @@5
@\discretionary via @@9 b=0 p=88 d=8921
@\discretionary via @@6 b=0 p=88 d=8921
@@14: line 4.1- t=34863 -> @@6
@\discretionary via @@10 b=0 p=88 d=8921
@@15: line 5.1- t=43963 -> @@10
@\par via @@0 b=0 p=-10000 d=1
@@16: line 1.1- t=1 -> @@0
@\par via @@11 b=0 p=-10000 d=100001
@\par via @@7 b=0 p=-10000 d=100001
@\par via @@4 b=0 p=-10000 d=100001
@\par via @@2 b=0 p=-10000 d=100001
@\par via @@1 b=0 p=-10000 d=100001
@@17: line 2.1- t=107922 -> @@1
@\par via @@12 b=0 p=-10000 d=100001
@\par via @@8 b=0 p=-10000 d=100001
@\par via @@5 b=0 p=-10000 d=100001
@\par via @@3 b=0 p=-10000 d=100001
@@18: line 3.1- t=116843 -> @@5
@\par via @@13 b=0 p=-10000 d=100001
@\par via @@9 b=0 p=-10000 d=100001
@\par via @@6 b=0 p=-10000 d=100001
@@19: line 4.1- t=125764 -> @@13
@\par via @@14 b=0 p=-10000 d=100001
@\par via @@10 b=0 p=-10000 d=100001
@@20: line 5.1- t=134864 -> @@14
@\par via @@15 b=0 p=-10000 d=100001
@@21: line 6.1- t=143964 -> @@15
{displayed math mode: \number}
! Improper alphabetic constant.
<to be read again>
\relax
l.249 ...mber\the\delcode`\relax
\over{{{}}}}\showlists % this...
A one-character control sequence belongs after a ` mark.
So I'm essentially inserting \0 here.
{the character i}
{\relax}
{\over}
{begin-group character {}
{begin-group character {}
{begin-group character {}
{end-group character }}
{end-group character }}
{end-group character }}
{end-group character }}
! Extra }, or forgotten $.
l.249 ...code`\relax\over{{{}}}}
\showlists % this is rather e...
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
{\showlists}
### displayed math mode entered at line 249
\subformula
.\subformula []
this will be denominator of:
\fraction thickness = default
\\mathord []
### vertical mode entered at line 0
### current page:
\glue(\topskip) 20.0 plus 1.0fil
\hbox(0.0+0.0)x11.0, glue set 1.3fil, shifted 1.0
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
etc.
total height 40.0 plus 82.0 plus 1.0fil
goal height 16383.99998
prevdepth 1.0, prevgraf 3 lines
! OK.
l.249 ...x\over{{{}}}}\showlists
% this is rather erroneous
{\halign}
! Improper \halign inside $$'s.
l.250 \halign
to\the\displaywidth{#\cr\cr} % the display coun...
Displays can use special alignments (like \eqalignno)
only if nothing but the alignment itself is between $$'s.
So I've deleted the formulas that preceded this alignment.
{restricted horizontal mode: end of alignment template}
Underfull \hbox (badness 10000) detected at line 250
[]
\hbox(0.0+0.0)x15.0
.\glue(\tabskip) 0.0
.\unsetbox(0.0+0.0)x0.0
.etc.
! Missing $$ inserted.
<to be read again>
\eqno
l.254 \eqno
% another error (actually causes two error messag...
Displays can use special alignments (like \eqalignno)
only if nothing but the alignment itself is between $$'s.
{internal vertical mode: \tracingcommands}
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
<to be read again>
\eqno
l.254 \eqno
% another error (actually causes two error messag...
Completed box being shipped out [-2.0.0.0.11.0.327680]
\vbox(16383.99998+0.0)x20.0, glue set 16331.0fil
.\glue(\topskip) 20.0 plus 1.0fil
.\hbox(0.0+0.0)x11.0, glue set 1.3fil, shifted 1.0
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\discretionary
..\ip -
..\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
.\penalty 37
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x12.0, glue set 1.89999fil, shifted 2.0
..\glue(\leftskip) 3.0
..\ip -
..\discretionary
..\discretionary
..\ip -
..\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
.\penalty -213
.\glue(\baselineskip) 3.0 plus 41.0
.\hbox(7.0+1.0)x13.0, glue set 1.7fil, shifted 3.0
..\glue(\leftskip) 3.0
..\ip - (ligature -↑↑@)
..\ip -
..\discretionary
..\kern1.0
..\ip A
..\discretionary
...\ip -
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
.\penalty 101
.\glue(\dispskip) 3.0 plus 44.0 minus 10.0
.\glue(\baselineskip) 9.0 plus 41.0
.\hbox(0.0+0.0)x15.0, shifted 5.0
..\glue(\tabskip) 0.0
..\hbox(0.0+0.0)x0.0
..\glue(\tabskip) 0.0
Memory usage before: 327&331; after: 228&323; max so far: 938&448
{horizontal mode: \eqno}
! You can't use `\eqno' in horizontal mode.
l.254 \eqno
% another error (actually causes two error messag...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\looseness}
{math mode character $}
{math mode: \right}
! Missing delimiter (. inserted).
<to be read again>
\relax
l.256 $\right\relax
\mathchardef\minus="322D % locally \minus ...
I was expecting to see something like `(' or `\{' or
`\}' here. If you typed, e.g., `{' instead of `\{', you
should probably delete the `{' by typing `1' now, so that
braces don't get unbalanced. Otherwise just proceed.
Acceptable delimiters are characters whose \delcode is
nonnegative, or you can use `\delimiter <delimiter code>'.
! Extra \right.
<to be read again>
\relax
l.256 $\right\relax
\mathchardef\minus="322D % locally \minus ...
I'm ignoring a \right that had no matching \left.
{\relax}
{\mathchardef}
{\left}
{the letter A}
{\over}
{the letter A}
{\abovewithdelims}
! Missing number.
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the TeX manual index.)
! Illegal unit of measure (pt inserted).
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
Dimensions can be in units of em, ex, dm, vu, wd, dp, ht,
pt, pc, in, cm, mm, bp, dd, cc, or sp; yours is a new one!
I'll assume that you meant to say pt, for printers' points.
To recover gracefully from this error, it's best to
delete the erroneous units; e.g., type `2' to delete
two letters. (See Chapter 27 of the manual.)
! Missing delimiter (. inserted).
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
I was expecting to see something like `(' or `\{' or
`\}' here. If you typed, e.g., `{' instead of `\{', you
should probably delete the `{' by typing `1' now, so that
braces don't get unbalanced. Otherwise just proceed.
Acceptable delimiters are characters whose \delcode is
nonnegative, or you can use `\delimiter <delimiter code>'.
! Missing delimiter (. inserted).
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
I was expecting to see something like `(' or `\{' or
`\}' here. If you typed, e.g., `{' instead of `\{', you
should probably delete the `{' by typing `1' now, so that
braces don't get unbalanced. Otherwise just proceed.
Acceptable delimiters are characters whose \delcode is
nonnegative, or you can use `\delimiter <delimiter code>'.
! Ambiguous; you need another { and }.
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
I'm ignoring this fraction specification, since I don't
know whether a construction like `x \over y \over z'
means `{x \over y} \over z' or `x \over {y \over z}'.
{the character ?}
{\right}
(->\delimiter "4162362
{the character +}
{\mskip}
! Illegal unit of measure (mu inserted).
<to be read again>
A
l.257 ...delims?\right(+\mskip1A
\minus=A+\penalty+1000A
The unit of measurement in math glue must be mu.
To recover gracefully from this error, it's best to
delete the erroneous units; e.g., type `2' to delete
two letters. (See Chapter 27 of the manual.)
{the letter A}
{\mathchar'31055}
{the character =}
{the letter A}
{the character +}
{\penalty}
{the letter A}
{blank space}
{\relpenalty}
{\binoppenalty}
{\mathsurround}
{math mode character $}
! \scriptfont 0 is undefined (character ?).
l.260 \mathsurround.11em$
% this formula goes on line 7
Somewhere in the math formula just ended, you used the
stated character from an undefined font family. Proceed,
and I'll try to forget that I needed that character.
{horizontal mode: blank space}
{math mode character $}
@firstpass
$[] \ip /
@\penalty via @@0 b=0 p=-3333 d=-11108888
@@1: line 7.1 t=-11108888 -> @@0
A \smalltrip --
@\penalty via @@0 b=0 p=-2222 d=-4937283
@@2: line 7.1 t=-4937283 -> @@0
@\penalty via @@1 b=0 p=-2222 d=-4937283
@@3: line 8.1 t=-16046171 -> @@1
\ip A /
@\penalty via @@0 b=0 p=1000 d=1002001
@@4: line 7.1 t=1002001 -> @@0
@\penalty via @@2 b=0 p=1000 d=1002001
@\penalty via @@1 b=0 p=1000 d=1002001
@@5: line 8.1 t=-10106887 -> @@1
@\penalty via @@3 b=0 p=1000 d=1002001
@@6: line 9.1 t=-15044170 -> @@3
A$
@\par via @@0 b=0 p=-10000 d=1
@@7: line 7.1- t=1 -> @@0
@\par via @@4 b=0 p=-10000 d=1
@\par via @@2 b=0 p=-10000 d=1
@\par via @@1 b=0 p=-10000 d=1
@@8: line 8.1- t=-11108887 -> @@1
@\par via @@5 b=0 p=-10000 d=1
@\par via @@3 b=0 p=-10000 d=1
@@9: line 9.1- t=-16046170 -> @@3
@\par via @@6 b=0 p=-10000 d=1
@@10: line 10.1- t=-15044169 -> @@6
{displayed math mode: blank space}
{\mkern}
{\vcenter}
{internal vertical mode: end-group character }}
{displayed math mode: blank space}
{superscript character ↑}
{\raise}
{restricted horizontal mode: the letter a}
{end-group character }}
{displayed math mode: end-group character }}
{blank space}
{\overline}
{superscript character ↑}
{blank space}
{the letter A}
{subscript character |}
{begin-group character {}
{end-group character }}
{superscript character ↑}
{the letter A}
{blank space}
{\mathchar}
{\char}
{subscript character ↑↑A}
{\mathaccent}
{\mathop}
{blank space}
{\mathbin}
{blank space}
{\mathopen}
{blank space}
{\mathpunct}
{\mathclose}
{blank space}
{\mathrel}
{blank space}
{\global}
{\mathaccent}
{\fam}
{the letter A}
{\the}
! Bad number (-1).
<to be read again>
}
l.269 ...the\scriptscriptfont-1}
}}}}
Since I expected to read a number between 0 and 15,
I changed this one to zero.
{select font trip}
{end-group character }}
{end-group character }}
{end-group character }}
{end-group character }}
{end-group character }}
{blank space}
{\mathop}
{superscript character ↑}
{\mathop}
{\limitswitch}
{subscript character |}
{blank space}
{\mathord}
! Missing { inserted.
<to be read again>
\radical
l.272 \mathord \radical
"161 % missing { will be inserted
A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)
{\radical}
{\textstyle}
{\radical}
{\left}
(->\delimiter "4162362
{\scriptscriptstyle}
{\mathop}
{\underline}
{blank space}
{the letter A}
{\atop}
{\displaystyle}
{the letter A}
{subscript character |}
{the letter A}
{\hfil}
{\over}
{the letter B}
{\nonscript}
{\hskip}
{end-group character }}
{superscript character ↑}
{end-group character }}
{end-group character }}
{blank space}
{\limitswitch}
{subscript character |}
{\nonscript}
! \nonscript must be followed by glue.
<to be read again>
\textstyle
l.275 ...h|{\nonscript\textstyle
\nonscript\mskip9mu minus1fil
Next time say, e.g., `\nonscript\mskip\the\thinmuskip' or
`\nonscript\kern3pt'. I'm ignoring the present \nonscript.
{\textstyle}
{\nonscript}
{\mskip}
{the letter B}
{\abovewithdelims}
(->\delimiter "4162362
{end-group character }}
{superscript character ↑}
(->\delimiter "4162362
{blank space}
{\discretionary}
{restricted horizontal mode: the character -}
{end-group character }}
{select font trip at 5.0pt}
{the letter A}
{\hss}
{end-group character }}
! Improper discretionary list.
l.277 ...ry{-}{\smalltrip A\hss}
{\smalltrip A}
Discretionary lists must contain only text characters.
The following discretionary sublist has been deleted:
\glue 0.0 plus 1.0fil minus 1.0fil
{select font trip at 5.0pt}
{the letter A}
{end-group character }}
! Illegal math \discretionary.
l.277 ...ip A\hss}{\smalltrip A}
Sorry: The third part of a discretionary break must be
empty, in math formulas. I had to delete your third part.
{displayed math mode: blank space}
{\right}
{the letter A}
{end-group character }}
{end-group character }}
{end-group character }}
{blank space}
{\let}
{\eqno}
{math mode: \scriptstyle}
{\mathchar'21455}
(->\delimiter "4162362
{\delimiter}
{\mathpunct}
{the letter A}
{the letter A}
{end-group character }}
{blank space}
{subscript character |}
{the letter B}
{\fam}
{the character -}
{end-group character }}
{superscript character ↑}
{\hbox}
{restricted horizontal mode: the letter A}
{end-group character }}
{math mode: end-group character }}
{begin-group character {}
{\above}
{begin-group character {}
{the letter u}
{\overwithdelims}
{blank space}
{\displaystyle}
{begin-group character {}
{the letter A}
{\atopwithdelims}
(->\delimiter "4162362
(->\delimiter "4162362
{\vrule}
{end-group character }}
{end-group character }}
{blank space}
{\show}
> \penalty=\mathchar'21455.
l.284 \show\penalty
\showlonglists ->{\tracingcommands 0 \showboxbreadth 9999 \showboxdepth
9999 \showlists }
{begin-group character {}
{\tracingcommands}
### math mode entered at line 285
### math mode entered at line 282
\subformula
.\fraction thickness = default
.\\mathord
.\.\fam1 u
./\displaystyle
./\subformula
./.\fraction thickness 0.0, left-delimiter '5421542, right-delimiter '54
21542
./.\\mathord
./.\.\fam1 A
././\rule(9.0+*)x0.40001
\subformula
this will be denominator of:
\fraction thickness 9.0
\{}
### math mode entered at line 280
\scriptstyle
\mathbin
.\fam3 -
\mathopen
.\fam1 b
\mathpunct
.\mathord
..\fam1 A
.\mathord
..\fam1 A
(\mathord
(.\hbox(7.0+1.0)x2.0
(..\ip A
[\mathord
[.\fam1 B
[\mathord
[.\fam0 -
\subformula
### displayed math mode entered at line 261
\mkern-9.0mu
\vcenter
.\vbox(0.0+0.0)x0.0
(\mathord
(.\hbox(7.0+1.0)x2.0, shifted -2.0
(..\ip a
\overline
.\mathord
.(\fam1 A
.\mathord
..\fam1 A
.[\fam3 -
.\subformula
..{}
.(\mathord
.(.\fam1 A
.(\mathord
.(.\fam1 A
.(\mathord
.(.\fam1 B
.([\accent\fam1 a
.([.\mathop
.([..\fam1 A
.([.\mathbin
.([..\fam1 A
.([.\mathopen
.([..\fam1 A
.([.\mathpunct
.([..\fam1 A
.([.\mathclose
.([..\fam1 A
.([.\mathrel
.([..\fam1 A
.([.\accent\fam1 a
.([..\mathord
.([...\fam13 A
\mathop
.\fam1 B
(\fam1 C
\mathop\limitswitch
.\fam1 b
[\fam1 C
\mathord
.\radical'541
..\textstyle
..\radical'12021602
...\subformula
....\left'5421542
....\scriptscriptstyle
....\mathop\limitswitch
.....\underline
......\fraction thickness 0.0
......\\mathord
......\.\fam1 A
....../\displaystyle
....../\mathord
....../.\fam1 A
....../(\fam2 -
....../[\fraction thickness = default
....../[\\mathord
....../[\.\fam1 A
....../[\\glue 0.0 plus 1.0fil
....../[/\mathord
....../[/.\fam1 B
....../[/\glue(\nonscript)
....../[/\glue 1.0
....(\fam1 b
....[\fraction thickness 2.0, left-delimiter '5421542
....[\\textstyle
....[\\glue(\nonscript)
....[\\glue(\mskip) 9.0mu minus 1.0fil
....[\\mathord
....[\.\fam1 B
....[/{}
....\discretionary
.....\ip -
....|\smalltrip A
....\right'5411541
...\mathord
....\fam1 A
### vertical mode entered at line 0
### current page:
\glue(\topskip) 7.3 plus 1.0fil
\hbox(12.7+3.7)x17.0, glue set 0.17223fil, shifted 7.0
.\glue(\leftskip) 3.0
.\mathon, surrounded 1.10001
.\hbox(12.7+3.7)x4.80002
..\hbox(0.0+0.0)x0.10001, shifted -7.0
..\hbox(12.7+3.7)x1.70001
...\hbox(0.0+0.0)x0.10001, shifted -7.0
...\vbox(12.7+3.7)x1.5
....\hbox(3.5+0.5)x1.5
.....\smalltrip A
.....\kern0.5
....\kern1.2
....\rule(1.0+0.0)x*
....\kern6.2
....\hbox(3.5+0.5)x1.5
.....\smalltrip A
.....\kern0.5
...\hbox(0.0+0.0)x0.10001, shifted -7.0
..\hbox(8.0+2.0)x3.0, shifted -4.0
...\ip b
.\glue(\medmuskip) 0.55554 minus 0.83331
.\ip /
.\penalty -3333
.\glue 0.27777
.\glue(\medmuskip) 0.55554 minus 0.83331
.\ip A
.\kern1.0
.\glue(\thickmuskip) -1.11108
.\smalltrip -
.\smalltrip -
.\penalty -2222
.\glue(\thickmuskip) -1.11108
.\ip A
.\glue(\medmuskip) 0.55554 minus 0.83331
.\ip /
.\penalty 1000
.\glue(\medmuskip) 0.55554 minus 0.83331
.\ip A
.\kern1.0
.\mathoff, surrounded 1.10001
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
total height 21.7 plus 1.0fil
goal height 16383.99998
prevdepth 3.7, prevgraf 7 lines
! OK.
\showlonglists ...99 \showlists
}
l.285 \showlonglists
$$ % end of the hairy display, missing ...
{math mode character $}
! Missing } inserted.
<to be read again>
}
<to be read again>
$
l.285 \showlonglists$
$ % end of the hairy display, missing ...
I've inserted something that you may have forgotten.
(See the things marked <to be read again> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
{end-group character }}
{math mode character $}
Missing character: There is no u in font trip!
! \scriptscriptfont 13 is undefined (character A).
l.285 \showlonglists$$
% end of the hairy display, missing ...
Somewhere in the math formula just ended, you used the
stated character from an undefined font family. Proceed,
and I'll try to forget that I needed that character.
Overfull \hbox (41.64128pt too wide) detected at line 285
[][] [] [] [] []|
\hbox(70.26251+98.15005)x19.0, glue set - 1.0
.\kern-2.49994
.\vbox(7.0+-7.0)x0.0
.etc.
{internal vertical mode: \tracingcommands}
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.285 \showlonglists$$
% end of the hairy display, missing ...
Completed box being shipped out [-2.0.0.0.11.0.327680]
\vbox(16383.99998+2.0)x28.0, glue set 16112.5874fil
.\glue(\topskip) 7.3 plus 1.0fil
.\hbox(12.7+3.7)x17.0, glue set 0.17223fil, shifted 7.0
..\glue(\leftskip) 3.0
..\mathon, surrounded 1.10001
..\hbox(12.7+3.7)x4.80002
...\hbox(0.0+0.0)x0.10001, shifted -7.0
...\hbox(12.7+3.7)x1.70001
....\hbox(0.0+0.0)x0.10001, shifted -7.0
....\vbox(12.7+3.7)x1.5
.....\hbox(3.5+0.5)x1.5
......\smalltrip A
......\kern0.5
.....\kern1.2
.....\rule(1.0+0.0)x*
.....\kern6.2
.....\hbox(3.5+0.5)x1.5
......\smalltrip A
......\kern0.5
....\hbox(0.0+0.0)x0.10001, shifted -7.0
...\hbox(8.0+2.0)x3.0, shifted -4.0
....\ip b
..\glue(\medmuskip) 0.55554 minus 0.83331
..\ip /
..\penalty -3333
..\glue 0.27777
..\glue(\medmuskip) 0.55554 minus 0.83331
..\ip A
..\kern1.0
..\glue(\thickmuskip) -1.11108
..\smalltrip -
..\smalltrip -
..\penalty -2222
..\glue(\thickmuskip) -1.11108
..\ip A
..\glue(\medmuskip) 0.55554 minus 0.83331
..\ip /
..\penalty 1000
..\glue(\medmuskip) 0.55554 minus 0.83331
..\ip A
..\kern1.0
..\mathoff, surrounded 1.10001
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
.\penalty 0
.\glue(\dispskip) 3.0 plus 44.0 minus 10.0
.\glue(\lineskip) 0.0 plus 40.0
.\hbox(70.26251+98.15005)x19.0, glue set - 1.0, shifted 9.0
..\kern-2.49994
..\vbox(7.0+-7.0)x0.0
..\hbox(9.0+0.0)x1.99001, shifted -8.10001
...\hbox(7.0+1.0)x2.0, shifted -2.0
....\ip a
..\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
..\vbox(17.3+4.10001)x15.01559
...\kern1.0
...\rule(1.0+0.0)x*
...\kern3.0
...\hbox(12.3+4.10001)x15.01559
....\hbox(3.5+0.5)x1.49001, shifted -8.3
.....\smalltrip A
.....\kern0.5
....\ip A
....\hbox(0.0+0.0)x-5.00999, shifted 4.10001
.....\ip -
....\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
....\hbox(0.0+0.0)x0.0
....\hbox(4.0+7.20004)x16.25781, shifted -8.3
.....\smalltrip A
.....\kern0.5
.....\kern1.0
.....\smalltrip B
.....\vbox(7.00003+2.0)x12.26781, shifted 5.20004
......\hbox(0.0+0.0)x0.0, shifted 2.1389
.......\bigtrip ['202]
......\kern-8.99998
......\hbox(16.00002+2.0)x12.2778
.......\hbox(14.00002+2.0)x6.00002, shifted -0.99998
........\bigtrip A
........\kern2.0
.......\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
.......\bigtrip A
.......\kern2.0
.......\vbox(16.00002+0.0)x0.0
........\hbox(14.00002+2.0)x0.0, shifted -3.0
.........\bigtrip a
........\kern0.0
........\hbox(0.0+0.0)x0.0
..\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
..\vbox(28.0+0.0)x3.0
...\kern10.0
...\hbox(0.0+0.0)x3.0, glue set 0.5fil
....\glue 0.0 plus 1.0fil minus 1.0fil
....\smalltrip C
....\glue 0.0 plus 1.0fil minus 1.0fil
...\kern6.0
...\hbox(12.0+0.0)x3.0
....\hbox(8.0+2.0)x3.0, shifted -4.0
.....\ip B
..\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
..\vbox(7.0+18.0)x6.0
...\hbox(7.0+0.0)x6.0
....\hbox(0.0+0.0)x6.0, shifted -7.0
.....\ip M
.....\kern2.0
...\kern8.0
...\hbox(0.0+0.0)x6.0, glue set 2.0fil, shifted -1.0
....\glue 0.0 plus 1.0fil minus 1.0fil
....\smalltrip C
....\glue 0.0 plus 1.0fil minus 1.0fil
...\kern10.0
..\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
..\hbox(70.26251+98.15005)x39.35779
...\hbox(70.26251+98.15005)x39.35779
....\hbox(7.0+1.0)x3.0, shifted -56.26251
.....\ip a
....\vbox(70.26251+98.15005)x36.35779
.....\kern7.0
.....\rule(7.0+0.0)x*
.....\kern1.56248
.....\hbox(54.70003+98.15005)x36.35779
......\hbox(1.0+0.0)x0.10001, shifted -52.70003
......\vbox(54.70003+98.15005)x36.25778
.......\kern1.0
.......\rule(1.0+0.0)x*
.......\kern1.25
.......\hbox(51.45003+98.15005)x36.25778
........\hbox(51.45003+98.15005)x32.98001
.........\vbox(-1.00002+22.99995)x7.0, shifted -18.99998
..........\hbox(-1.00002+2.0)x7.0
...........\ip ↑↑@
..........\hbox(-1.00002+2.0)x7.0
...........\ip ↑↑@
..........\hbox(7.0+1.0)x3.0
...........\ip A
..........\hbox(-1.00002+2.0)x7.0
...........\ip ↑↑@
..........\hbox(-1.00002+2.0)x7.0
...........\ip ↑↑@
..........\hbox(8.0+2.0)x3.0
...........\ip B
.........\hbox(35.75003+94.55006)x8.39005
..........\vbox(35.75003+94.55006)x8.39005
...........\hbox(35.75003+49.05003)x8.39005
............\hbox(0.0+0.0)x0.10001, shifted -7.0
............\vbox(35.75003+49.05003)x8.19003
.............\hbox(14.00002+2.0)x8.19003, glue set 1.09502fil
..............\glue 0.0 plus 1.0fil minus 1.0fil
..............\bigtrip A
..............\kern2.0
..............\glue 0.0 plus 1.0fil minus 1.0fil
.............\kern27.30002
.............\hbox(8.10001+33.40002)x8.19003
..............\ip A
..............\vbox(27.75002+13.75002)x6.19003, shifted 19.65001
...............\hbox(0.0+0.0)x-2.50999, shifted 1.0
................\smalltrip -
...............\kern4.0
...............\hbox(23.75002+13.75002)x6.19003
................\hbox(0.0+0.0)x0.10001, shifted -7.0
................\vbox(23.75002+13.75002)x6.00002
.................\hbox(14.00002+2.0)x6.00002
..................\bigtrip A
..................\kern2.0
..................\glue 0.0 plus 1.0fil
.................\kern0.5
.................\rule(0.5+0.0)x*
.................\kern0.5
.................\hbox(16.0+4.00002)x6.00002, glue set 0.00002fil
..................\glue 0.0 plus 1.0fil minus 1.0fil
..................\bigtrip B
..................\glue(\nonscript)
..................\glue 0.0 plus 1.0fil minus 1.0fil
................\hbox(0.0+0.0)x0.10001, shifted -7.0
............\hbox(0.0+0.0)x0.10001, shifted -7.0
...........\kern27.30002
...........\rule(9.10001+0.0)x*
.........\vbox(146.40009+3.2)x11.58995, shifted 94.95006
..........\hbox(16.0+4.00002)x5.99001
...........\bigtrip b
..........\kern106.40007
..........\hbox(20.0+3.2)x11.58995
...........\hbox(16.0+4.00002)x6.0, shifted -1.0
............\bigtrip b
...........\vbox(20.0+3.2)x5.49994
............\hbox(8.0+2.0)x5.49994
.............\glue(\nonscript)
.............\glue 2.49994 minus 1.0fil
.............\ip B
............\kern2.0
............\rule(2.0+0.0)x*
............\kern9.2
............\hbox(0.0+0.0)x5.49994
...........\hbox(0.0+0.0)x0.10001, shifted -7.0
.........\discretionary
..........\ip -
.........|\smalltrip A
.........\hbox(14.00002+2.0)x6.00002, shifted -0.99998
..........\bigtrip a
........\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
........\ip A
........\kern1.0
..\rule(*+*)x5.0
.\penalty 10000
.\glue(\lineskip) 0.0 plus 40.0
.\hbox(20.5+57.80002)x9.39003, shifted 18.60997
..\ip -
..\smalltrip b
..\hbox(3.5+0.5)x1.5
...\smalltrip A
...\kern0.5
..\vbox(26.0+4.00002)x1.99001, shifted 10.8
...\hbox(7.0+1.0)x1.99001
....\ip A
...\kern2.0
...\hbox(16.0+4.00002)x0.99001
....\bigtrip B
....\ip -
..\hbox(20.5+57.80002)x9.40002
...\hbox(20.5+57.80002)x9.40002
....\hbox(0.0+0.0)x0.10001, shifted -7.0
....\vbox(20.5+57.80002)x9.20001
.....\hbox(0.0+0.0)x9.20001
.....\kern9.0
.....\rule(9.0+0.0)x*
.....\kern9.0
.....\hbox(20.65001+30.65001)x9.20001
......\hbox(20.65001+30.65001)x9.20001
.......\hbox(20.65001+30.65001)x9.20001
........\hbox(0.0+0.0)x0.10001, shifted -7.0
........\vbox(20.65001+30.65001)x9.0
.........\hbox(0.0+0.0)x9.0
.........\kern9.10001
.........\rule(9.10001+0.0)x*
.........\kern9.10001
.........\hbox(18.5+5.5)x9.0
..........\hbox(18.5+5.5)x9.0
...........\hbox(8.0+2.0)x3.0, shifted -4.0
............\ip b
...........\vbox(18.5+5.5)x3.0
............\hbox(7.0+1.0)x3.0
.............\ip A
.............\kern1.0
............\kern7.0
............\hbox(9.0+0.0)x3.0, glue set 1.3fil
.............\glue 0.0 plus 1.0fil minus 1.0fil
.............\rule(9.0+*)x0.40001
.............\glue 0.0 plus 1.0fil minus 1.0fil
...........\hbox(8.0+2.0)x3.0, shifted -4.0
............\ip b
........\hbox(0.0+0.0)x0.10001, shifted -7.0
......\hbox(0.0+0.0)x0.0
....\hbox(0.0+0.0)x0.10001, shifted -7.0
Memory usage before: 2057&418; after: 1116&366; max so far: 2111&448
{horizontal mode: \parshape}
{\leftskip}
{\spacefactor}
{\raise}
{restricted horizontal mode: \special}
{end-group character }}
{horizontal mode: blank space}
{\penalty}
{\spacefactor}
! Bad space factor (0).
l.289 \spacefactor=0
I allow only values in the range 1..65536 here.
{\write}
{\par}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 11.3 t=100020783 -> @@0
@\penalty via @@0 b=10000 p=-10000 d=100020783
@@2: line 11.3 t=100020783 -> @@0
@\penalty via @@1 b=10000 p=-10000 d=100020001
@@3: line 12.3 t=200040784 -> @@1
[]
@\par via @@2 b=10000 p=-10000 d=100020001
@@4: line 12.3- t=200040784 -> @@2
@\par via @@3 b=10000 p=-10000 d=100020001
@@5: line 13.3- t=300060785 -> @@3
Underfull \hbox (badness 10000) in paragraph at lines 285--290
[]
\hbox(1.0+0.0)x90.0, glue set 43.0
.\glue(\leftskip) 0.0 plus -10.0fil
.\hbox(0.0+0.0)x0.0, shifted -1.0 []
.etc.
Underfull \hbox (badness 10000) in paragraph at lines 285--290
[]
\hbox(0.0+0.0)x100.0
.\glue(\leftskip) 0.0 plus -10.0fil
.\write10{\the \spacefactor }
.etc.
{vertical mode: end-group character }}
! Extra }, or forgotten \groupend.
l.291 }
% this fails to match \groupbegin
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
{blank space}
{\groupend}
{\mark}
! Improper use of \the.
l.293 \mark{\the\spacefactor
} % \spacefactor: not in vertical...
You can say \the\spacefactor only in horizontal mode,
and \the\prevdepth only in vertical mode; and
neither of these is meaningful inside \write. So
I'm forgetting what you said and using zero for this \the.
{math mode character $}
{horizontal mode: math mode character $}
@firstpass
@secondpass
[]
@\par via @@0 b=* p=-10000 d=783
@@1: line 1.3- t=783 -> @@0
Underfull \hbox (badness 10000) in paragraph at lines 294--294
[]
\hbox(0.0+0.0)x11.0
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{displayed math mode: \global}
{\mskip}
{\vtop}
{internal vertical mode: \vbox}
{end-group character }}
{\noindent}
{horizontal mode: math mode character $}
{displayed math mode: blank space}
{\global}
{\lowercase}
{the letter a}
{the letter a}
{math mode character $}
{horizontal mode: end-group character }}
{displayed math mode: \hss}
{\leqno}
{math mode: \mathchardef}
! You can only define a control sequence.
<to be read again>
A
l.298 \leqno\mathchardef A
\/$$
I'm ignoring this improper \mathchardef.
{the letter A}
{\/}
{math mode character $}
{internal vertical mode: \tracingcommands}
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.298 \leqno\mathchardef A\/$$
Completed box being shipped out [-2.0.0.0.11.0.327680.1572864.0.-1073741
823]
\vbox(16383.99998+2.0)x100.0, glue set 16320.0fil
.\glue(\topskip) 19.0 plus 1.0fil
.\hbox(1.0+0.0)x90.0, glue set 43.0
..\glue(\leftskip) 0.0 plus -10.0fil
..\hbox(0.0+0.0)x0.0, shifted -1.0
...\special{-11}
..\glue 4.0 plus 2.0 minus 1.0
..\penalty -10000
..\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
.\penalty 125
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x100.0
..\glue(\leftskip) 0.0 plus -10.0fil
..\write10{\the \spacefactor }
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0 plus 10.0fil minus 0.00002
.\mark{0}
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x11.0, shifted 1.0
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\penalty 10000
..\glue(\parfillskip) 0.0
..\glue(\rightskip) 0.0
.\penalty 0
.\glue(\dispskip) 3.0 plus 44.0 minus 10.0
.\glue(\baselineskip) 3.0 plus 41.0
.\hbox(7.0+13.00002)x13.0, shifted 3.0
..\hbox(7.0+1.0)x3.0
...\ip A
...\kern1.0
...\kern0.0
..\kern5.0
..\hbox(0.0+13.00002)x5.0, glue set - 10.49988fil
...\glue 4.99988 minus 4.99988
...\vbox(-0.00002+13.00002)x10.5, glue set - 0.00247
....\vbox(-0.00002+0.0)x0.0
....\glue(\parskip) 0.0 plus 42.0 minus 8.0
....\penalty 0
....\glue(\dispaskip) 1.0 plus 45.0 minus 803.0
....\glue(\baselineskip) 3.0 plus 41.0
....\hbox(7.0+1.0)x5.0, shifted 5.5
.....\ip a
.....\ip a
.....\kern1.0
....\penalty -1245184
....\glue(\dispbskip) 3.0 plus 46.0
...\glue 0.0 plus 1.0fil minus 1.0fil
! Improper use of \the.
<write> \the \spacefactor
<to be read again>
} \endwrite
<to be read again>
}
<output> ...5\shipout \copy 254}
\ifabsent 254{\relax } \else...
l.298 \leqno\mathchardef A\/$$
You can say \the\spacefactor only in horizontal mode,
and \the\prevdepth only in vertical mode; and
neither of these is meaningful inside \write. So
I'm forgetting what you said and using zero for this \the.
0
Memory usage before: 449&329; after: 295&326; max so far: 2111&448
{horizontal mode: \par}
{vertical mode: \hangindent}
{\parfillskip}
{\the}
{horizontal mode: \the}
{the character 0}
Missing character: There is no 0 in font trip!
{blank space}
{\char}
{math mode character $}
@firstpass
@secondpass
[]\ip A
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
['202]
@\par via @@0 b=62 p=-10000 d=3969
@@2: line 1.2- t=3969 -> @@0
Loose \hbox (badness 62) in paragraph at lines 302--303
[]\ip A ['202]
\hbox(7.0+1.0)x100.0, glue set 0.85295
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{displayed math mode: \global}
{\leqno}
{math mode: \kern}
{math mode character $}
! Display math should end with $$.
<to be read again>
\par
l.303 ...e\leqno\kern1009pt$\par
The `$' that I just saw supposedly matches a previous `$$'.
So I shall assume that you typed `$$' both times.
{internal vertical mode: \tracingcommands}
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
<to be read again>
\par
l.303 ...e\leqno\kern1009pt$\par
Completed box being shipped out [-2.0.0.0.11.0.327680.1572864.1073741823
.-1073741823]
\vbox(16383.99998+0.0)x8236.0, glue set 16344.0fil
.\glue(\topskip) 13.0 plus 1.0fil
.\hbox(7.0+1.0)x100.0, glue set 0.85295
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\ip A
..\glue 4.0 plus 1.99799 minus 1.00099
..\ip ['202]
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 100.0
..\glue(\rightskip) 0.0
.\penalty 0
.\glue(\baselineskip) 9.0 plus 41.0
.\hbox(0.0+0.0)x1009.0, shifted 7227.0
..\kern1009.0
.\penalty 10000
.\glue(\baselineskip) 10.0 plus 41.0
.\hbox(0.0+0.0)x-7127.0, shifted 7227.0
Memory usage before: 222&319; after: 165&317; max so far: 2111&448
{horizontal mode: \par}
{vertical mode: \showlists}
### vertical mode entered at line 0
prevdepth 0.0, prevgraf 4 lines
! OK.
l.304 \showlists
{\setcount}
{\baselineskip}
{begin-group character {}
{\sfcode}
{\vfuzz}
{\vbox}
{internal vertical mode: \hsize}
{\tolerance}
{the letter A}
{horizontal mode: the letter A}
{blank space}
{the letter A}
{blank space}
{the letter A}
{blank space}
{the letter A}
{blank space}
{the letter A}
{\par}
@firstpass
@secondpass
[]\ip A A A
@ via @@0 b=* p=0 d=1
@@1: line 1.0 t=1 -> @@0
A A
@\par via @@1 b=* p=-10000 d=1
@@2: line 2.1- t=2 -> @@1
Overfull \hbox (3.0pt too wide) in paragraph at lines 308--308
[]\ip A A A|
\hbox(7.0+1.0)x10.0, glue set - 1.0
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
Tight \hbox (badness 12) in paragraph at lines 308--308
\ip A A
\hbox(7.0+1.0)x10.0, glue set - 0.5
.\glue(\leftskip) 3.0
.\ip A
.etc.
{internal vertical mode: \hfuzz}
{the letter A}
{horizontal mode: the letter A}
{blank space}
{the letter A}
{blank space}
{the letter A}
{blank space}
{the letter A}
{blank space}
{the letter A}
{\par}
@firstpass
@secondpass
[]\ip A A A
@ via @@0 b=* p=0 d=1
@@1: line 1.0 t=1 -> @@0
A A
@\par via @@1 b=* p=-10000 d=1
@@2: line 2.1- t=2 -> @@1
Tight \hbox (badness 12) in paragraph at lines 309--309
\ip A A
\hbox(7.0+1.0)x10.0, glue set - 0.5
.\glue(\leftskip) 3.0
.\ip A
.etc.
{internal vertical mode: end-group character }}
{vertical mode: blank space}
{end-group character }}
{blank space}
{\vbox}
{internal vertical mode: \hbadness}
{\hbox}
{restricted horizontal mode: \hskip}
{end-group character }}
{internal vertical mode: blank space}
{\hbox}
{restricted horizontal mode: \hskip}
{end-group character }}
Underfull \hbox (badness 101) detected at line 312
\hbox(0.0+0.0)x10.03749, glue set 1.00375
.\glue 0.0 plus 10.0
{internal vertical mode: end-group character }}
{vertical mode: blank space}
{\lineskiplimit}
{\def}
{\vbox}
{internal vertical mode: \tracinglostchars}
{the letter A}
{horizontal mode: the letter A}
{\/}
\space ->
{blank space}
\space ->
{blank space}
{\ignorespace}
\space ->
\space ->
{the letter J}
{blank space}
{\boxmaxdepth}
{\vskip}
{\par}
@firstpass
@secondpass
[]\ip A
@\kern via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
@\par via @@0 b=56 p=-10000 d=3249
@\par via @@1 b=10000 p=-10000 d=100020001
@@2: line 1.2- t=3249 -> @@0
Loose \hbox (badness 56) in paragraph at lines 315--316
[]\ip A
\hbox(7.0+1.0)x100.0, glue set 0.82695
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{internal vertical mode: \vskip}
{\vbox}
{\mark}
{end-group character }}
Underfull \vbox (badness 10000) detected at line 316
\vbox(10.0+-1.0)x0.0
.\mark{vii}
{\vskip}
{\unskip}
{\setbox}
{\showthe}
> -1.0pt.
l.317 ...astbox\showthe\lastskip
% \lastskip=-1pt (\baselines...
{\unskip}
{\vskip}
{\showbox}
> \box22=
\vbox(10.0+-1.0)x0.0
.\mark{vii}
! OK.
<to be read again>
}
l.318 ...the\lastskip\showbox22}
{end-group character }}
Underfull \vbox (badness 10000) detected at line 318
\vbox(11.0+0.0)x100.0
.\hbox(7.0+1.0)x100.0, glue set 0.82695 []
.\glue 2.0
.etc.
{vertical mode: blank space}
{\showbox}
> \box22=absent
! OK.
l.319 \showbox22
{\show}
> \botmark=\botmark:
0.
l.320 \show\botmark
{\lineskiplimit}
{\setcount}
{\vbox}
{internal vertical mode: \accent}
{horizontal mode: \accent}
{blank space}
{the letter A}
{\ }
{\texinfo}
{\ }
{\spaceskip}
\↑↑M->\
{\ }
{\vskip}
{\par}
@firstpass
@secondpass
[][]\ip A
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
A
@ via @@0 b=10000 p=0 d=100020783
@ via @@1 b=10000 p=0 d=100020001
@@2: line 1.3 t=100020783 -> @@0
@\par via @@0 b=44 p=-10000 d=2025
@\par via @@1 b=58 p=-10000 d=3481
@\par via @@2 b=10000 p=-10000 d=100020001
@@3: line 1.2- t=2025 -> @@0
Loose \hbox (badness 44) in paragraph at lines 322--324
[][]\ip A A
\hbox(10.50002+1.0)x100.0, glue set 0.76414
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{internal vertical mode: \vskip}
{end-group character }}
Overfull \vbox (0.50002pt too high) detected at line 324
\vbox(11.0+0.0)x100.0, glue set - 1.0
.\hbox(10.50002+1.0)x100.0, glue set 0.76414 []
.\glue 10.0 minus 10.0
{vertical mode: blank space}
{\penalty}
{internal vertical mode: \tracingcommands}
> -2147483647.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.325 \penalty-2147483647
% that's the largest value TeX will...
Completed box being shipped out [-2.0.0.0.11.196608.327680.1572864.10737
41823]
\vbox(16383.99998+0.0)x100.0, glue set 16332.0fil
.\glue(\topskip) 9.0 plus 1.0fil
.\vbox(11.0+1.0)x10.0, glue set - 1.0
..\hbox(7.0+1.0)x10.0, glue set - 1.0
...\glue(\leftskip) 3.0
...\hbox(0.0+0.0)x0.0
...\ip A
...\glue 4.0 plus 1.0 minus 2.0
...\ip A
...\glue 4.0 plus 1.0 minus 2.0
...\ip A
...\glue(\rightskip) 0.0
...\rule(*+*)x5.0
..\penalty 125
..\glue(\baselineskip) 2.0
..\hbox(7.0+1.0)x10.0, glue set - 0.5
...\glue(\leftskip) 3.0
...\ip A
...\glue 4.0 plus 1.0 minus 2.0
...\ip A
...\penalty 10000
...\glue(\parfillskip) 0.0 plus 100.0
...\glue(\rightskip) 0.0
..\glue(\parskip) 0.0 plus 42.0 minus 8.0
..\glue(\baselineskip) 2.0
..\hbox(7.0+1.0)x10.0, glue set - 1.0
...\glue(\leftskip) 3.0
...\hbox(0.0+0.0)x0.0
...\ip A
...\glue 4.0 plus 1.0 minus 2.0
...\ip A
...\glue 4.0 plus 1.0 minus 2.0
...\ip A
...\glue(\rightskip) 0.0
..\penalty 125
..\glue(\baselineskip) 2.0
..\hbox(7.0+1.0)x10.0, glue set - 0.5
...\glue(\leftskip) 3.0
...\ip A
...\glue 4.0 plus 1.0 minus 2.0
...\ip A
...\penalty 10000
...\glue(\parfillskip) 0.0 plus 100.0
...\glue(\rightskip) 0.0
.\glue(\lineskip) 0.0 plus 40.0
.\vbox(10.0+0.0)x10.03749
..\hbox(0.0+0.0)x10.0, glue set 1.0
...\glue 0.0 plus 10.0
..\glue(\baselineskip) 10.0
..\hbox(0.0+0.0)x10.03749, glue set 1.00375
...\glue 0.0 plus 10.0
.\glue(\baselineskip) -1.0
.\vbox(11.0+0.0)x100.0
..\hbox(7.0+1.0)x100.0, glue set 0.82695
...\glue(\leftskip) 3.0
...\hbox(0.0+0.0)x0.0
...\ip A
...\kern1.0
...\glue 4.0 plus 1.99799 minus 1.00099
...\glue 4.0 plus 1.99799 minus 1.00099
...\penalty 10000
...\glue(\parfillskip) 0.0 plus 100.0
...\glue(\rightskip) 0.0
..\glue 2.0
..\glue -2.0
.\glue(\lineskip) 0.0 plus 40.0
.\vbox(11.0+0.0)x100.0, glue set - 1.0
..\hbox(10.50002+1.0)x100.0, glue set 0.76414
...\glue(\leftskip) 3.0
...\hbox(0.0+0.0)x0.0
...\kern-5.50003
...\hbox(8.0+2.0)x3.0, shifted -2.50002
....\ip B
...\kern2.50003
...\ip A
...\glue 4.0 plus 2.0 minus 1.0
...\ip A
...\glue 4.0 plus 2.0 minus 1.0
...\glue 4.0 plus 2.0 minus 88.0
...\penalty 10000
...\glue(\parfillskip) 0.0 plus 100.0
...\glue(\rightskip) 0.0
..\glue 10.0 minus 10.0
Memory usage before: 630&344; after: 400&330; max so far: 2111&448
{vertical mode: \penalty}
! Number too big.
l.326 \penalty-2147483648
% see?
I can only go up to 2147483647='17777777777="7FFFFFFF,
so I'm using that number instead of yours.
{\tabskip}
{\let}
{\setcount}
{\def}
{\setbox}
{internal vertical mode: \vskip}
{end-group character }}
{vertical mode: blank space}
{\halign}
! Illegal preamble.
l.331 ...pand-12.truedd{#\A\span
&
You mustn't say \span in an alignment until after the \cr
that ends the preamble. But proceed; I'll ignore this \span.
\d #1\d ->#1#1
#1<-##
! Only one # is allowed per tab.
<argument> ##
\d #1\d ->#1#1
l.333 ...s7200bp minus 4wd4\d#\d
\cr % \d#\d becomes (erroneou...
There should be exactly one # between &'s, when an
\halign or \valign is being set up. In this case you had
more than one, so I'm ignoring all but the first.
{restricted horizontal mode: \global}
{\def}
{\global}
\A ->B
{the letter B}
{end of alignment template}
{\vbox}
{internal vertical mode: \halign}
\A ->\global \setcount \count 1=\the ##\cr \omit \cr \tabskip
{restricted horizontal mode: end of alignment template}
{\global}
{end of alignment template}
{internal vertical mode: the letter A}
{horizontal mode: the letter A}
{end-group character }}
@firstpass
@secondpass
[]\ip AA
@\par via @@0 b=* p=-10000 d=1
@@1: line 1.2- t=1 -> @@0
Loose \hbox (badness 86) in paragraph at lines 337--337
[]\ip AA
\hbox(7.0+1.0)x100.0, glue set 0.95
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{restricted horizontal mode: blank space}
{end of alignment template}
{\valign}
{internal vertical mode: the letter A}
{horizontal mode: the letter A}
{end of alignment template}
@firstpass
@secondpass
[]\ip A
@\par via @@0 b=* p=-10000 d=1
@@1: line 1.2- t=1 -> @@0
Loose \hbox (badness 86) in paragraph at lines 337--337
[]\ip A
\hbox(7.0+1.0)x100.0, glue set 0.95
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{internal vertical mode: begin-group character {}
{blank space}
{end-group character }}
{end of alignment template}
Overfull \vbox (26.49995pt too high) detected at line 337
\vbox(-5.0+0.0)x8.0
.\glue(\tabskip) 4.49998 plus 7227.0
.\unsetbox(8.0+0.0)x8.0
.etc.
{restricted horizontal mode: end of alignment template}
{\global}
{\lccode}
\A ->\uppercase { \message {trip at 5.0pt\ip mix}\lowercase {uq}}
{\uppercase}
{blank space}
{\message}
TRIP AT 5.0PT\ip AIX
{\lowercase}
{the letter u}
Missing character: There is no u in font trip!
{end of alignment template}
{math mode character $}
{math mode: math mode character $}
{restricted horizontal mode: end of alignment template}
\A ->\uppercase { \message {trip at 5.0pt\ip mix}\lowercase {uq}}
{\hss}
{\uppercase}
{blank space}
{\message}
TRIP AT 5.0PT\ip AIX
{\lowercase}
{the letter u}
Missing character: There is no u in font trip!
{end of alignment template}
{internal vertical mode: \prevdepth}
{\errmessage}
! \count 2=-1118806.
<to be read again>
}
l.341 ...e{\count2=\the\count2}}
This error message was generated by an \errmessage
command, so I can't give any explicit help.
Pretend that you're Hercule Poirot, examine all clues,
and deduce the truth by order and method.
{end-group character }}
Tight \hbox (badness 30) detected at line 342
[] [] []
\hbox(106.9846+0.0)x205.11287, glue set - 0.66667
.\glue(\tabskip) 0.0154 minus 3.20895
.\unsetbox(0.0+0.0)x0.0
.etc.
{vertical mode: blank space}
{\errmessage}
! \prevdepth =20.0pt.
l.343 ...evdepth=\the\prevdepth}
(That was another \errmessage.)
{\penalty}
{internal vertical mode: \tracingcommands}
> -88888.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.344 \penalty-88888
% end alignment test, now miscellaneous ...
Completed box being shipped out [-2.2.-1118806.0.11.196608.327680.157286
4.1073741823]
\vbox(16383.99998+2.0)x205.11287, glue set 16354.0fil
.\glue(\topskip) 0.0 plus 1.0fil
.\hbox(20.0+2.0)x205.11287, glue set - 0.66667
..\glue(\tabskip) 0.0154 minus 3.20895
..\hbox(20.0+2.0)x104.8607, glue set - 0.02431
...\ip B
...\vbox(20.0+1.0)x100.0
....\hbox(0.0+0.0)x0.0, glue set 0.00174
.....\glue(\tabskip) 4.49998 plus 7227.0
.....\hbox(0.0+0.0)x0.0
.....\glue(\tabskip) -17.07162
....\glue(\baselineskip) 10.0
....\hbox(0.0+0.0)x0.0, glue set 0.00174
.....\glue(\tabskip) 4.49998 plus 7227.0
.....\hbox(0.0+0.0)x0.0
.....\glue(\tabskip) -17.07162
....\glue(\parskip) 0.0 plus 42.0 minus 8.0
....\glue(\baselineskip) 3.0
....\hbox(7.0+1.0)x100.0, glue set 0.95
.....\glue(\leftskip) 3.0
.....\hbox(0.0+0.0)x0.0
.....\ip A (ligature AA)
.....\penalty 10000
.....\glue(\parfillskip) 0.0 plus 100.0
.....\glue(\rightskip) 0.0
...\glue 4.0 plus 2.0 minus 88.0
..\kern0.0
..\glue(\tabskip) 0.0154 minus 3.20895
..\hbox(20.0+2.0)x100.0
...\vbox(-5.0+0.0)x100.0
....\glue(\tabskip) 4.49998 plus 7227.0
....\vbox(8.0+0.0)x100.0
.....\hbox(7.0+1.0)x100.0, glue set 0.95
......\glue(\leftskip) 3.0
......\hbox(0.0+0.0)x0.0
......\ip A
......\penalty 10000
......\glue(\parfillskip) 0.0 plus 100.0
......\glue(\rightskip) 0.0
....\glue(\tabskip) 4.49998 plus 7227.0
....\vbox(0.0+0.0)x100.0
....\glue(\tabskip) 4.49998 plus 7227.0
...\vbox(-5.0+0.0)x0.0
....\glue(\tabskip) 4.49998 plus 7227.0
....\vbox(8.0+0.0)x0.0
....\glue(\tabskip) 4.49998 plus 7227.0
....\vbox(0.0+0.0)x0.0
....\glue(\tabskip) 4.49998 plus 7227.0
..\glue(\tabskip) 4.49998 plus 7227.0
.\glue(\baselineskip) 0.0
.\hbox(8.0+2.0)x205.11287, glue set - 0.66667
..\glue(\tabskip) 0.0154 minus 3.20895
..\hbox(8.0+2.0)x202.7368, glue set 188.7368fil
...\glue 4.0 plus 2.0 minus 88.0
...\ip b
...\mathon
...\mathoff
...\glue 0.0 plus 1.0fil minus 1.0fil
...\glue 4.0 plus 2.0 minus 88.0
...\ip b
..\kern0.0
..\glue(\tabskip) 4.49998 plus 7227.0
Memory usage before: 573&349; after: 352&343; max so far: 2111&448
{vertical mode: \global}
! You can't use a prefix with `\unskip'.
<to be read again>
\unskip
l.345 \global\unskip
\lastbox
I'll pretend you didn't say \long or \outer or \global.
{\unskip}
! You can't use `\unskip' in vertical mode.
l.345 \global\unskip
\lastbox
Sorry...I'm usually unable to take things from the current
page. Try `I\vskip\minusthe\lastskip' instead.
{\lastbox}
! You can't use `\lastbox' in vertical mode.
l.345 \global\unskip\lastbox
Sorry...I'm usually unable to take things from the current
page. This \lastbox will therefore be absent.
{\textfont}
! Bad number (16).
<to be read again>
=
l.346 \textfont16=
\relax
Since I expected to read a number between 0 and 15,
I changed this one to zero.
! Missing font identifier.
<to be read again>
\relax
l.346 \textfont16=\relax
I was looking for a control sequence whose
current meaning has been defined by \font.
{\relax}
{\outer}
! You can't use \long or \outer with `\let'.
l.347 \outer\let
\setdimen=:\def?
I'll pretend you didn't say \long or \outer here.
! You can use \let only with control sequences.
<to be read again>
:
l.347 \outer\let\setdimen=:
\def?
I'm not \let-ting anything change here,
since I can only do things like `\let\a=\b'.
{the character :}
{horizontal mode: the character :}
Missing character: There is no : in font trip!
{\def}
! You can only define a control sequence.
<to be read again>
?
l.347 \outer\let\setdimen=:\def?
Please don't say `\def cs{...}', say `\def\cs{...}'.
I'm ignoring the \def command here. You can
recover graciously from this error if you're careful;
see exercise 27.xx in the manual.
{the character ?}
Missing character: There is no ? in font trip!
{blank space}
{\setdimen}
{\showthe}
> -16383.99998pt.
l.348 ...77777sp\showthe\dimen5
% this should be OK
{\setdimen}
! Dimension too large.
l.349 \setdimen6=-'40000pt
\showthe\dimen6 % this should overflow
I can't work with sizes bigger than about 19 feet.
Continue and I'll use the largest value I can.
{\showthe}
> -16383.99998pt.
l.349 ...40000pt\showthe\dimen6
% this should overflow
{\setdimen}
{\showthe}
> -8355.74998pt.
l.350 ...=.51dm5\showthe\dimen7
\multdimen7 by 2\showthe\dimen7
{\multdimen}
! Arithmetic overflow.
<to be read again>
\showthe
l.350 ...multdimen7 by 2\showthe
\dimen7
I can't carry out that multiplication or division,
since the result is out of range.
{\showthe}
> -8355.74998pt.
l.350 ...en7 by 2\showthe\dimen7
! Undefined control sequence.
l.351 \a↑↑@↑↑@a
@ % an undefined control sequence followed by ...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Text line contains an invalid character.
l.351 \a↑↑@↑↑@a@
% an undefined control sequence followed by ...
A funny symbol that I can't read has just been input.
Continue, and I'll forget that it ever happened.
{begin-group character {}
{\gdef}
{\def}
\b ->\c
\c ->
{end-group character }}
{blank space}
\b ->\c
! Undefined control sequence.
\b ->\c
l.352 ...f\b{\c} \def\c{} \b} \b
% \c is undefined outside th...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
{\def}
{\outer}
{\long}
{\outer}
! Parameters must be numbered consecutively.
<to be read again>
8
l.356 ...ef\lo#1#2#3#4#5#6#7#8#8
#9#{\relax}
I've inserted the digit you should have used after the #.
Type `1' to delete what you did use.
! You already have nine parameters.
l.356 ...\lo#1#2#3#4#5#6#7#8#8#9
#{\relax}
I'm going to ignore the # sign you just used.
{\case}
\l #1->
#1<-\par
\b #1\par ->
Runaway argument?
{
! Paragraph ended before \b was complete.
<to be read again>
\par
l.357 ...ndefined}{\l\par\b{\par
% occurrence of \par aborts ...
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
{\par}
@firstpass
@secondpass
[]
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
@\par via @@0 b=75 p=-10000 d=5776
@\par via @@1 b=10000 p=-10000 d=100020001
@@2: line 1.2- t=5776 -> @@0
Loose \hbox (badness 75) in paragraph at lines 347--357
[]
\hbox(0.0+0.0)x100.0, glue set 0.91176
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
\b #1\par ->
#1<-\l \undefined
{vertical mode: end-group character }}
{\case}
{end-group character }}
! Missing \else{} inserted for \case.
<to be read again>
\case
l.359 \case0{}\case
5 % missing elses
The \case construction should have had an \else here,
or a new group beginning with `{', but I found neither.
So I'm going on as if you said `\else{}'.
{\case}
! Missing \else{} inserted for \case.
<to be read again>
\chcode
l.360 \chcode
`↑↑C = 6 % another parameter symbol
The \case construction should have had an \else here,
or a new group beginning with `{', but I found neither.
So I'm going on as if you said `\else{}'.
{\chcode}
{\let}
{\def}
{\halign}
Runaway preamble?
! Forbidden control sequence found while scanning preamble of \↑↑C.
<to be read again>
\cr }
<to be read again>
\lo
l.363 \↑↑C{\lo
#\cr............89{}\cr} % runaway in preamble?
I suspect you have forgotten a `}', causing me
to read past where you wanted me to stop.
I'll try to recover; but if the error is serious,
you'd better type `E' or `X' now and fix your file.
! Missing # inserted in alignment preamble.
<to be read again>
\cr
<to be read again> \cr
}
<to be read again>
\lo
l.363 \↑↑C{\lo
#\cr............89{}\cr} % runaway in preamble?
There should be exactly one # between &'s, when an
\halign or \valign is being set up. In this case you had
none, so I've put one in; maybe that will work.
\lo #1#2#3#4#5#6#7#8#989#{->\relax {
#1<-##
#2<-\cr
#3<-.
#4<-.
#5<-.
#6<-.
#7<-.
#8<-.
#9<-......
{\relax}
{begin-group character {}
{end-group character }}
{\cr}
! There's no \halign or \valign going on.
l.363 ...#\cr............89{}\cr
} % runaway in preamble?
I can't figure out why you would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
{\relax}
{end-group character }}
! Too many }'s.
l.363 ...\cr............89{}\cr}
% runaway in preamble?
You've closed more groups than you opened.
Such booboos are generally harmless, so keep going.
{blank space}
{\def}
! Illegal parameter number in definition of \a.
<to be read again>
2
l.364 \def\a↑↑C1{\d#1\d\l{#2
}\l#1\par\a↑↑@↑↑@a#1\par# % runaw...
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I'm going to assume you meant ##.
Runaway definition?
↑↑C1->\d ↑↑C1\d \l {##2}\l ↑↑C1\par
! Forbidden control sequence found while scanning definition of \a.
<to be read again>
}
<to be read again>
\a↑↑@↑↑@a
l.364 ...\l{#2}\l#1\par\a↑↑@↑↑@a
#1\par# % runaway in definiti...
I suspect you have forgotten a `}', causing me
to read past where you wanted me to stop.
I'll try to recover; but if the error is serious,
you'd better type `E' or `X' now and fix your file.
\a↑↑@↑↑@a #1\par #2->
#1<-##1
#2<-##
{\xdef}
\d #1\d ->#1#1
#1<-##1
\l #1->
#1<-##2
\l #1->
#1<-##
Runaway definition?
↑↑C1->↑↑C1↑↑C11\par
! Forbidden control sequence found while scanning definition of \a.
<to be read again>
}
<to be read again>
\a↑↑@↑↑@a
l.365 ...\l{#2}\l#1\par\a↑↑@↑↑@a
#1\par# % runaway in definiti...
I suspect you have forgotten a `}', causing me
to read past where you wanted me to stop.
I'll try to recover; but if the error is serious,
you'd better type `E' or `X' now and fix your file.
\a↑↑@↑↑@a #1\par #2->
#1<-##1
#2<-##
\a↑↑@↑↑@a #1\par #2->
#1<-
Runaway argument?
{
! Forbidden control sequence found while scanning use of \a↑↑@↑↑@a.
<to be read again>
\par
<to be read again>
\lo
l.366 ↑↑?a↑↑@↑↑@a\par{\lo
\par % runaway in use
I suspect you have forgotten a `}', causing me
to read past where you wanted me to stop.
I'll try to recover; but if the error is serious,
you'd better type `E' or `X' now and fix your file.
\lo #1#2#3#4#5#6#7#8#989#{->\relax {
#1<-\par
Runaway argument?
! Forbidden control sequence found while scanning use of \lo.
<to be read again>
\par
<to be read again>
\lo
l.367 \lo
\par\par\par\par\par\par\par\par\par\par89{}
I suspect you have forgotten a `}', causing me
to read past where you wanted me to stop.
I'll try to recover; but if the error is serious,
you'd better type `E' or `X' now and fix your file.
#2<-
\lo #1#2#3#4#5#6#7#8#989#{->\relax {
#1<-\par
#2<-\par
#3<-\par
#4<-\par
#5<-\par
#6<-\par
#7<-\par
#8<-\par
#9<-\par \par
{\relax}
{begin-group character {}
{end-group character }}
{blank space}
{\setmuskip}
! Incompatible glue units.
l.368 ...ip3=5mu plus \muskip100
I'm going to assume that 1mu=1pt when they're mixed.
! Incompatible glue units.
l.368 ...ip3=5mu plus \muskip100
I'm going to assume that 1mu=1pt when they're mixed.
{\advmuskip}
! Incompatible glue units.
l.369 \advmuskip3 by \skip100
I'm going to assume that 1mu=1pt when they're mixed.
{\divmuskip}
{\multmuskip}
{\showthe}
> 0.0mu minus 0.00003fil.
l.372 \showthe\muskip3
{\divcount}
! Arithmetic overflow.
l.373 \divcount88 By 0
I can't carry out that multiplication or division,
since the result is out of range.
{\advcount}
! Missing `by'.
<to be read again>
↑
l.375 ↑
\mskip\muskip3M\nonscript\hskip\the\thinmuskip
I didn't do the arithmetic because you have to tell
me by what; e.g., `\advcount 0 by 1'.
{superscript character ↑}
! Missing $ inserted.
<to be read again>
↑
l.375 ↑
\mskip\muskip3M\nonscript\hskip\the\thinmuskip
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
{math mode character $}
{horizontal mode: math mode character $}
{math mode: superscript character ↑}
! Missing { inserted.
<to be read again>
\mskip
l.375 ↑\mskip
\muskip3M\nonscript\hskip\the\thinmuskip
A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)
{\mskip}
{the letter M}
{\nonscript}
{\hskip}
! Incompatible glue units.
l.375 ...pt\hskip\the\thinmuskip
I'm going to assume that 1mu=1pt when they're mixed.
{\par}
! Missing $ inserted.
<to be read again>
\par
l.376
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
{math mode character $}
! Missing } inserted.
<to be read again>
}
<to be read again>
$
<to be read again>
\par
l.376
I've inserted something that you may have forgotten.
(See the things marked <to be read again> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
{end-group character }}
{math mode character $}
{horizontal mode: \par}
@firstpass
@secondpass
[]$[]$
@\par via @@0 b=* p=-10000 d=1
@@1: line 1.2- t=1 -> @@0
Loose \hbox (badness 80) in paragraph at lines 375--376
[]$[]$
\hbox(8.2+0.0)x100.0, glue set 0.9301
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{vertical mode: begin-group character {}
{\setbox}
{restricted horizontal mode: \vfill}
! You can't use `\vfill' in restricted horizontal mode.
l.377 {\setbox3\hbox{\vfill
}\vsplit 3 0pt}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{end-group character }}
{vertical mode: \vsplit}
! Missing `to' inserted.
<to be read again>
0
l.377 ...hbox{\vfill}\vsplit 3 0
pt}
I'm working on `\vsplit<box number> to <dimen>';
will look for the <dimen> next.
! \vsplit needs a \vbox.
<to be read again>
}
l.377 ...x{\vfill}\vsplit 3 0pt}
The box you are trying to split is an \hbox.
I can't split such a box, so I'll leave it alone.
{end-group character }}
{blank space}
{\def}
! Parameters must be numbered consecutively.
<to be read again>
2
l.378 \def\a#2
{}
I've inserted the digit you should have used after the #.
Type `1' to delete what you did use.
{\show}
! Not a control sequence.
<to be read again>
A
l.379 \show A
Next time say, e.g., `\show\cs'.
{the letter A}
{horizontal mode: the letter A}
{blank space}
{\show}
> \a↑↑@↑↑@a=\outer macro:
#1\par #2->.
l.380 \show\a↑↑@↑↑@a
{\show}
> (=macro:
->\delimiter "4162362 .
l.381 \show (
{blank space}
{\show}
> \lo=\long\outer macro:
#1#2#3#4#5#6#7#8#989#{->\relax {.
l.382 \show\lo
{\show}
> \↑↑C=\halign.
l.383 \show\↑↑C
{\show}
> \batchmode=\batchmode.
l.384 \show\batchmode
{\show}
> \error=undefined.
l.385 \show\error
{\showthe}
> {\tracingcommands 0\showthe \outputpenalty \showboxbreadth 9999 \showb
oxdepth 9999 {\setbox 254=\box 255\shipout \copy 254} \ifabsent 254{\rel
ax } \else {\error } }.
l.386 \showthe\output
{\showthe}
> 1.0mu plus 2.0fill minus 3.0mu.
l.387 \showthe\thinmuskip
{\showthe}
> -2.0pt.
l.388 \showthe\texinfo\enorm1
{\ifx}
{\if}
! Incomplete \if.
<to be read again>
\par
l.389 ...T\span{}\else{\if T\par
\if\span % aborted
I need to see two characters immediately after \if.
Something's wrong here, so I won't make any \if test.
{\par}
@firstpass
@secondpass
[]\ip A
@ via @@0 b=10000 p=0 d=100020783
@@1: line 1.3 t=100020783 -> @@0
@\par via @@0 b=70 p=-10000 d=5041
@\par via @@1 b=10000 p=-10000 d=100020001
@@2: line 1.2- t=5041 -> @@0
Loose \hbox (badness 70) in paragraph at lines 379--389
[]\ip A
\hbox(7.0+1.0)x100.0, glue set 0.89218
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{vertical mode: \if}
! Incomplete \if.
<to be read again>
\span
l.389 ...else{\if T\par \if\span
% aborted
I need to see two characters immediately after \if.
Something's wrong here, so I won't make any \if test.
{\span}
! There's no \halign or \valign going on.
l.389 ...else{\if T\par \if\span
% aborted
I can't figure out why you would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
{\relax}
{\ifdim}
! Missing = inserted for \ifdim.
<to be read again>
1
l.390 \ifdim72pt1
in}}
I was expecting to see `<', `=', or `>'. Didn't.
! Missing { inserted.
l.390 \ifdim72pt1in}
}
There should have been a `{' before the `}' that
I just looked at. So I put one in.
! Missing \else{} inserted.
<to be read again>
}
l.390 \ifdim72pt1in}}
An \if test turned out to be false; but
no \else followed the first clause.
So I'm going on as if you said `\else{}'.
{end-group character }}
{\hangindent}
{begin-group character {}
{\if}
{\hangindent}
{\if}
{\relax}
{end-group character }}
{end-group character }}
{\showthe}
> 0.0pt.
l.393 \showthe\hangindent
\showthe\hangafter}\showthe\hangin...
{\showthe}
> 0.
l.393 ...ndent\showthe\hangafter
}\showthe\hangindent\showthe\...
{end-group character }}
{\showthe}
> 2.0pt.
l.393 ...ter}\showthe\hangindent
\showthe\hangafter
{\showthe}
> 1.
l.393 ...ndent\showthe\hangafter
{\char}
{horizontal mode: \char}
Missing character: There is no ['203] in font trip!
{math mode character $}
{math mode: \mark}
! You can't use `\mark' in math mode.
l.395 $\mark
\vadjust\insert&\input\hrule\moveleft\indent % ca...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\vadjust}
! You can't use `\vadjust' in math mode.
l.395 $\mark\vadjust
\insert&\input\hrule\moveleft\indent % ca...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\insert}
! You can't use `\insert' in math mode.
l.395 $\mark\vadjust\insert
&\input\hrule\moveleft\indent % ca...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{alignment tab character &}
! There's no \halign or \valign going on.
l.395 $\mark\vadjust\insert&
\input\hrule\moveleft\indent % ca...
I can't figure out why you would want to use a tab mark
here. If you just want an ampersand, the remedy is
simple: Just type `I\&' now. But if some right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
{\relax}
{\input}
! You can't use `\input' in math mode.
l.395 ...k\vadjust\insert&\input
\hrule\moveleft\indent % can'...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\hrule}
! You can't use `\hrule' in math mode.
l.395 ...ust\insert&\input\hrule
\moveleft\indent % can't do t...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\moveleft}
! You can't use `\moveleft' in math mode.
l.395 ...t&\input\hrule\moveleft
\indent % can't do that in ma...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\indent}
! You can't use `\indent' in math mode.
l.395 ...t\hrule\moveleft\indent
% can't do that in math mode
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\unbox}
! You can't use `\unbox' in math mode.
l.396 \unbox
\accent\valign\vfill\vfil\vfilneg\vss % likewise;...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\accent}
! You can't use `\accent' in math mode.
l.396 \unbox\accent
\valign\vfill\vfil\vfilneg\vss % likewise;...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\valign}
! You can't use `\valign' in math mode.
l.396 \unbox\accent\valign
\vfill\vfil\vfilneg\vss % likewise;...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\vfill}
! Missing $ inserted.
<to be read again>
\vfill
l.396 \unbox\accent\valign\vfill
\vfil\vfilneg\vss % likewise;...
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
{math mode character $}
{horizontal mode: \vfill}
{\par}
@firstpass
@secondpass
[]$$
@\par via @@0 b=* p=-10000 d=1
@@1: line 1.2- t=1 -> @@0
Loose \hbox (badness 91) in paragraph at lines 394--396
[]$$
\hbox(0.0+0.0)x100.0, glue set 0.97
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{vertical mode: \vfill}
{\vfil}
{\vfilneg}
{\vss}
{\def}
! Missing { inserted.
l.397 \def\a}
Where was the left brace? You said something like `\def\a}',
which I'm going to interpret as `\def\a{}'.
{\def}
{\def}
{\let}
{\def}
{\ifx}
\b ->\a \c
{\ifx}
{\ifinner}
{\relax}
{end-group character }}
{end-group character }}
{end-group character }}
{\ifvmode}
{math mode character $}
! Infinite glue shrinkage found on current page.
<to be read again>
$
l.402 \ifvmode{$
\ifmmode{\hbox\ifhmode{\hfilneg}\else{\error}...
The page about to be output contains some infinitely
shrinkable glue, e.g., `\vss' or `\vskip 0pt minus 1fil'.
Such glue doesn't belong there; but you can safely proceed,
since the offensive shrinkability has been made finite.
{horizontal mode: math mode character $}
{math mode: \ifmmode}
{\hbox}
! Missing { inserted.
<to be read again>
\ifhmode
l.402 ...$\ifmmode{\hbox\ifhmode
{\hfilneg}\else{\error}}$ % m...
A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)
{restricted horizontal mode: \ifhmode}
{\hfilneg}
{end-group character }}
{end-group character }}
{math mode: math mode character $}
! Missing } inserted.
<to be read again>
}
<to be read again>
$
l.402 ...hfilneg}\else{\error}}$
% missing { and }\else
I've inserted something that you may have forgotten.
(See the things marked <to be read again> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
{end-group character }}
! Missing \else{} inserted.
<to be read again>
$
l.402 ...hfilneg}\else{\error}}$
% missing { and }\else
An \if test turned out to be true; but
no \else followed the first clause.
So I'm going on as if you said `\else{}'.
{math mode character $}
{horizontal mode: blank space}
{\else}
! Extra \else.
l.403 \else
\noalign\omit % these are extra
If there was an \if or \case before this \else,
I've lost track of it, so something else is wrong.
{\noalign}
! Misplaced \noalign.
l.403 \else\noalign
\omit % these are extra
I expect to see \noalign only after the \cr of
an alignment. Proceed, and I'll ignore this case.
{\omit}
! Misplaced \omit.
l.403 \else\noalign\omit
% these are extra
I expect to see \omit only after tab marks or the \cr of
an alignment. Proceed, and I'll ignore this case.
{\texinfo}
! Missing font identifier.
<to be read again>
1
l.404 \texinfo 1
000=20vu\showthe\texinfo\trip1000
I was looking for a control sequence whose
current meaning has been defined by \font.
{\showthe}
! Font \ip has 13 texinfo parameters.
l.404 ...howthe\texinfo\trip1000
To increase the number of font parameters, you must
use \texinfo immediately after the \font is loaded.
> 0.0pt.
l.404 ...howthe\texinfo\trip1000
{\mag}
{\par}
@firstpass
@secondpass
[]$[]$
@\par via @@0 b=* p=-10000 d=1
@@1: line 1.2- t=1 -> @@0
Loose \hbox (badness 91) in paragraph at lines 402--406
[]$[]$
\hbox(0.0+0.0)x100.0, glue set 0.97
.\glue(\leftskip) 3.0
.\hbox(0.0+0.0)x0.0
.etc.
{vertical mode: \halign}
! Incompatible magnification (1999);
the previous value will be retained (2000).
<to be read again>
m
l.407 \halign to 1truem
m{\l{#}\cr
I can handle only one magnification ratio per job. So I've
reverted to the magnification you used earlier on this run.
\l #1->
#1<-$
{restricted horizontal mode: end of alignment template}
! Extra alignment tab has been changed to \cr.
<template> }\ENDTEMPLATE.
l.408 $&
.}
You have given more \span or & marks than there were
in the preamble to the \halign or \valign now in progress.
So I'll assume that you meant to type \cr instead.
\l #1->
#1<-.
{blank space}
{\par}
! Missing } inserted.
<to be read again>
}
<to be read again>
\par
l.409
I've inserted something that you may have forgotten.
(See the things marked <to be read again> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
{end-group character }}
! Missing \cr inserted.
<to be read again>
\cr
<to be read again>
}
<to be read again>
\par
l.409
I'm guessing that you meant to end an alignment here.
{\cr}
! Missing { inserted.
<to be read again>
\cr
<to be read again>
}
<to be read again>
\par
l.409
I've put in what seems to be necessary to fix
the current column of the current alignment.
Try to go on, since this might almost work.
{begin-group character ['201]}
{end-group character }}
{end of alignment template}
Tight \hbox (badness 7) detected at line 409
[]
\hbox(4.0+0.0)x1.42262, glue set - 0.40639
.\glue(\tabskip) 0.0154 minus 3.20895
.\unsetbox(4.0+0.0)x4.0
.etc.
{vertical mode: \par}
{\hbox}
{restricted horizontal mode: \textfont}
{\prevdepth}
! You can't use `\prevdepth' in restricted horizontal mode.
l.410 ...tfont3=\enorm\prevdepth
\xspaceskip0pt\spacefactor200...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\xspaceskip}
{\spacefactor}
{begin-group character {}
{blank space}
{end-group character }}
{blank space}
{\texinfo}
{math mode character $}
{math mode: \radical}
{end-group character }}
{\delimiterfactor}
{\left}
(->\delimiter "4162362
{the letter A}
{the letter a}
{math mode character $}
! Missing \right. inserted.
<to be read again>
\right .
<to be read again>
$
l.411 ...iterfactor1600\left(Aa$
}
I've inserted something that you may have forgotten.
(See the things marked <to be read again> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
{\right}
{math mode character $}
{restricted horizontal mode: end-group character }}
{vertical mode: blank space}
{\openin}
{\closein}
{begin-group character {}
{\ifeof}
{\openin}
! Bad number (100).
l.413 {\ifeof 15{\openin 100
tripos
Since I expected to read a number between 0 and 15,
I changed this one to zero.
{\def}
{\chcode}
\loop ->\ifeof 0{\let \loop =\relax }\else {{\global \read 0 \a }\show \
a }\loop
{\ifeof}
{begin-group character {}
{\global}
{end-group character }}
{\show}
> \a=macro:
->\par .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
{end-group character }}
\loop ->\ifeof 0{\let \loop =\relax }\else {{\global \read 0 \a }\show \
a }\loop
{\ifeof}
{begin-group character {}
{\global}
! Text line contains an invalid character.
<read 0> \uppercase {0
\outputpenalty }
\loop ...e {{\global \read 0 \a
}\show \a }\loop
l.415 \chcode`015\loop
}\else{}}
A funny symbol that I can't read has just been input.
Continue, and I'll forget that it ever happened.
{end-group character }}
{\show}
> \a=macro:
->\uppercase {\outputpenalty } .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
{end-group character }}
\loop ->\ifeof 0{\let \loop =\relax }\else {{\global \read 0 \a }\show \
a }\loop
{\ifeof}
{begin-group character {}
{\global}
{end-group character }}
{\show}
> \a=macro:
->\uppercase {mmmmmmmmmm} .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
{end-group character }}
\loop ->\ifeof 0{\let \loop =\relax }\else {{\global \read 0 \a }\show \
a }\loop
{\ifeof}
{begin-group character {}
{\global}
{end-group character }}
{\show}
> \a=macro:
->\par .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
{end-group character }}
\loop ->\ifeof 0{\let \loop =\relax }\else {{\global \read 0 \a }\show \
a }\loop
{\ifeof}
{\let}
{end-group character }}
{\relax}
{end-group character }}
{end-group character }}
{blank space}
{\showboxdepth}
{\showboxbreadth}
{\output}
{\maxdeadcycles}
{\chcode}
{\chcode}
{\relax}
\↑↑@ #{->{
! Use of \↑↑@ doesn't match its definition.
l.420 \relax
\chcode`\↑↑M=13 \defqqM{\relax}#\groupbegin
If you say, e.g., `\def\a1{...}', then you must always
put `1' after `\a', since control sequence names are
made up of letters only. The macro here has not been
followed by the required stuff, so I'm ignoring it.
{\chcode}
{\def}
{macro parameter character #}
! You can't use `macro parameter character #' in vertical mode.
l.420 ...↑↑M=13 \def↑↑M{\relax}#
\groupbegin
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{\groupbegin}
↑↑M->\relax
{\relax}
↑↑M->\relax
{\relax}
{\long}
{\immediate}
\l #1\l ->#1
! Argument of \l has an extra }.
<to be read again>
\par
<to be read again>
}
<to be read again> }
\endwrite
l.422 ...10{\string\caution \l}
% living dangerously
I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.
Runaway argument?
! Paragraph ended before \l was complete.
<to be read again>
\par
<to be read again>
}
<to be read again> }
\endwrite
l.422 ...10{\string\caution \l}
% living dangerously
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
\caution\par
{\end}
{internal vertical mode: \global}
{\unbox}
{\end}
! You can't use `\end' in internal vertical mode.
<output> ... 0by1\unbox 255\end
}
<to be read again>
\end
l.423 \end
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{end-group character }}
{vertical mode: \end}
{internal vertical mode: \global}
{\unbox}
{\end}
! You can't use `\end' in internal vertical mode.
<output> ... 0by1\unbox 255\end
}
<to be read again>
\end
l.423 \end
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
{end-group character }}
{vertical mode: \end}
! \output loop---2 consecutive dead cycles.
<to be read again>
\end
l.423 \end
I've concluded that your \output is awry; it never does a
\shipout, so I'm shipping \box255 out myself. Next time
increase \maxdeadcycles if you want me to be more patient!
Completed box being shipped out [0.2.-1118806.0.11.196608.327680.1572864
.1073741823]
\vbox(16383.99998+0.0)x639.77809, glue set 12617.59814fill
.\glue(\topskip) 20.0 plus 1.0fil
.\hbox(0.0+0.0)x100.0, glue set 0.91176
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\glue 4.0 plus 2.0 minus 88.0
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 100.0
..\glue(\rightskip) 0.0
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 1.8
.\hbox(8.2+0.0)x100.0, glue set 0.9301
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\mathon
..\hbox(0.0+0.0)x3.99001, shifted -8.2
...\glue 0.0 minus 0.00003fil
...\smalltrip M
...\kern1.0
...\glue(\nonscript)
..\mathoff
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 100.0
..\glue(\rightskip) 0.0
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 3.0
.\hbox(7.0+1.0)x100.0, glue set 0.89218
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\ip A
..\glue 4.0 plus 1.99799 minus 88.08807
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 100.0
..\glue(\rightskip) 0.0
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 9.0
.\hbox(0.0+0.0)x100.0, glue set 0.97
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\mathon
..\mathoff
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 100.0
..\glue(\rightskip) 0.0
.\glue 0.0 plus 1.0fill
.\glue 0.0 plus 1.0fil
.\glue 0.0 plus -1.0fil
.\glue 0.0 plus 1.0fil minus 1.0
.\glue(\parskip) 0.0 plus 42.0 minus 8.0
.\glue(\baselineskip) 10.0
.\hbox(0.0+0.0)x100.0, glue set 0.97
..\glue(\leftskip) 3.0
..\hbox(0.0+0.0)x0.0
..\mathon
..\hbox(0.0+0.0)x0.0
...\glue 0.0 plus -1.0fil
..\mathoff
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 100.0
..\glue(\rightskip) 0.0
.\glue(\baselineskip) 10.0
.\hbox(0.0+0.0)x1.42262, glue set - 0.40639
..\glue(\tabskip) 0.0154 minus 3.20895
..\hbox(0.0+0.0)x4.0
..\glue(\tabskip) 0.0154 minus 3.20895
.\glue(\baselineskip) 10.0
.\hbox(0.0+0.0)x1.42262, glue set - 0.40639
..\glue(\tabskip) 0.0154 minus 3.20895
..\hbox(0.0+0.0)x4.0
...\glue 4.0 plus 2.0 minus 88.0
..\glue(\tabskip) 0.0154 minus 3.20895
.\glue(\lineskip) 0.0 plus 40.0
.\hbox(3545.60136+140.80052)x639.77809
..\glue 6.0 plus 4.0 minus 44.0
..\glue 6.0 plus 4.0 minus 44.0
..\mathon
..\hbox(3545.60136+140.80052)x614.40031
...\hbox(1638.40019+409.6015)x614.40031, shifted -268.80098
....\enorm b
...\vbox(3545.60136+0.0)x0.0
....\kern1638.40019
....\rule(1638.40019+0.0)x*
....\kern268.80098
....\hbox(0.0+0.0)x0.0
..\glue(\thinmuskip) 0.27777 plus 2.0fill minus 0.83331
..\hbox(19.99994+5.99994)x13.10001
...\vbox(-1.00002+26.99989)x7.0, shifted -20.99995
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(7.0+1.0)x3.0
.....\ip A
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(-1.00002+2.0)x7.0
.....\ip ↑↑@
....\hbox(8.0+2.0)x3.0
.....\ip B
...\ip A
...\kern1.0
...\ip a
...\kern1.0
...\hbox(0.0+0.0)x0.10001, shifted -7.0
..\mathoff
.\hbox(0.0+0.0)x100.0
.\penalty 10000
.\hbox(0.0+0.0)x100.0
.\penalty 10000
.\hbox(0.0+0.0)x100.0
Memory usage before: 561&263; after: 107&248; max so far: 2111&448
{\end}
(\end occurred inside a group at level 1)
Statistics for this run:
1137 strings of total length 22810
...TeX capacity is currently 3000 31000
Maximum memory usage 2111&448
...TeX capacity is currently 2200&801
276 multiletter control sequences
...TeX capacity is currently 2100
724 words of font info for 4 fonts
...TeX capacity is currently 15000 75
2 hyphenation exceptions
...TeX capacity is currently 307
Maximum stack usage 5i,7n,9p,121b,34s
...TeX capacity is currently 80i,40n,30p,500b,300s
Output written on TRIP.DVI (15 pages, 2728 bytes).